Table of Contents
Advertisement
Chapter 3: BIOS Setup
NVMEM memory test [Diable] by Default
Run NVIDIA memory testing module during POST.
DQS Training Control [Skip DQS] by Default
Perform/Skip DQS training.
CKE base power down mode [Enable] by Default
Enable or disable CKE base power down mode.
CKE power down control [Per Channel] by Default
CKE power down mode selection. It should be set to "per channel" for non
mobile systems.
Memclock tri-stating [Disable] by Default
Memclock tri-stating during C3 and Alt VID.
Memory Hole remapping [Enable] by Default
Enable or disable memory hole remapping.
Auto Optimize Bottom IO [Enable] by Default
Auto optimize maximum DRAM size when kernel assigns PCI resources done.
32
Advertisement
Table of Contents
