Table of Contents
Advertisement
Chapter 3: BIOS Setup
Memory Configuration
SLI-Ready Memory [Disable] by Default
Enable memory settings that are SLI-Ready (only functional with DRAM that is SLI-Ready).
Memory Timings [Press Enter]
Use this menu to control memory timings (see Memory Timings section below).
Drive Strength setting [Press Enter]
Use this menu to control drive strength settings (see Drive Strength settings section below).
Memory Configuration Menu
Dram on-die termination [Auto] by Default
Resistance of the on-die termination resistors.
Read/Write queue bypass [Auto] by Default
Number of times to bypass the read/write queue.
Bypass Maximum [Auto] by Default
Max number of times that the oldest memory access request can be
bypassed.
32 Byte Granularity [Auto] by Default
32/64 byte DRAM access granularity.
31
Advertisement
Table of Contents
