Storage - WACKER Group PDT 2 Repair Manual

PD

4.13 Storage

WARNING
4.13.1 Remove discharge plug from pump casing and drain out any water left
4.13.2 Remove pump cover and clean inside of pump housing. Coat inside of
4.13.3 Tape up suction and discharge ports to prevent anything from falling
4.13.4 Change engine oil and follow procedures described in engine manual
4.13.5 Cover pump and engine and store in a clean, dry area.
wc_tx000593gb.fm
If pump is being stored for more than 30 days:
NEVER open priming plug, discharge plug, or cover when pump is hot.
in the housing after pump has cooled.
pump with a light film of oil to reduce corrosion. A spray can of oil works
well for this.
into pump.
for engine storage.
31
Maintenance