Owner's Manual Permobil K/C300
R-Net control panel
Locking/unlocking the wheelchair
The control system can be locked in two different ways. Either by using a key
sequence on the keypad or with a physical key. The method used depends on
how the system has been programmed.
Locking with the keypad:
•
Press and hold down the on/off key while the control system is active.
•
After 1 second, the control system emits a beep. Release the on/off key.
•
Move the joystick forwards until the control system emits a beep.
•
Move the joystick back until the control system emits a beep.
•
Release the joystick. You will hear a long beep.
•
The wheelchair is now locked.
Control panels with display will now show the following screen:
Unlocking:
•
Press the on/off key if the control system is switched off. On control panels
without display the LEDs on the speed indicator will "wander" backwards
and forwards).
•
Move the joystick forwards until the control system emits a beep.
•
Move the joystick back until the control system emits a beep.
•
Release the joystick. You will hear a long beep.
•
The wheelchair is now unlocked.
67
Design and function, R-net