Permobil K300 Owner's Manual page 31

Owner's Manual Permobil K/C300
VR2 control panel
On/off key
This switch is used to start or switch off the wheelchair. The start key must be
pressed for the wheelchair to work.
m
WARNING
Do not use the on/off key to stop the wheelchair, except in an emergency. You can be thrown out
of the chair or reduce the life of the wheelchair's drive system.
Horn
Press the switch to produce a signal to attract attention.
Hazard lights*
This key activates/deactivates the wheelchair's hazard lights. Hazard lights are
used when the wheelchair is stationary in a position which may represent a risk
or an obstacle for others. Press this key to activate the hazard lights. Press it
again to deactivate them. When the hazard lights are active, the indicator lamp
next to the control key flashes in time with all the indicators on the wheelchair.
Lights*
This key activates and deactivates the wheelchair's lights. Press this key to
switch on the lights. Press it again to switch them off. When the lights are acti-
vated, the indicator lamp next to the control key is also switched on.
Max. speed
These keys normally reduce or increase the wheelchair's maximum speed. In
special applications, the keys can instead control the choice of driving profile.
Seat functions**
Activates/deactivates the seat functions with which your wheelchair is equipped.
The function selected is then controlled using the joystick.
Indicators*
These keys activate and deactivate the wheelchair's left and right indicators.
Press the key to activate the indicators. Press it again to deactivate them. When
the indicators are active, the indicator lamp next to the control key flashes in time
with the left or right indicators on the wheelchair.
*
Applies only if the wheelchair is fitted with lights.
** Applies only if the wheelchair is fitted with electric seat functions
32
Design and function (VR2)