Utilities - TANDBERG Educator & Professional MXP Instructions Manual

TANDBERG Educator & Professional MXP Videoconferencing System

4.4 Utilities

There are a number of setup options and configurations that can be utilized to customize and configure your
system. Press the UTILITIES button to enter the utilities and setup page.
Standby/Log-off
Logs off and places the System in 'standby' mode. You will be returned to the start page.
System Information
Provides basic system information
System Setup
Allows for further setup and configuration options. See
Secondary
STREAM CONTROLS and TELEPHONE ADD-ON behave the same way as the Call Utility functions --
Communications
press to activate or deactivate.
Room Tools
Press to enable/disable configured PRESSURE MATS and ROOM CONTROLS (i.e. lights, projectors,
audio, etc.). These options are configured in System Setup >
Configuration
DO NOT DISTURB: press to activate 'Do Not Disturb'. While this is active, you will NOT accept (auto-
answer) any incoming calls.
AUTO ANSWER: press to activate (green) 'Auto Answer'. When not activated, you must manually accept
any incoming calls.
You may also configure 'Auto Answer' with the Mic on or off when it connects.
Return
Returns to the MAIN conference page.
D50326.05
TOUCH PANEL OPERATION
System Setup.
ROOM SETUP.
48