System Overview; Control Interface - TANDBERG Educator & Professional MXP Instructions Manual

TANDBERG Educator & Professional MXP Videoconferencing System

1.2 System Overview

The TANDBERG Educator MXP and Professional MXP videoconferencing systems are comprised of the
following: components for CONTROL, components for AUDIO and VIDEO, and ancillary components that can
be added to provide a richer videoconferencing experience.

1.2.1 Control Interface

1.2.2 Audio and Video Sources
1.2.3 Other Components
1.2.1 Control Interface
The TANDBERG videoconferencing system is easily controlled through the touch panel interface. The touch
panel controls all presentation and videoconferencing needs via the TAM MXP and the codec.
Touch Panel
The 12", 24-bit color touch panel is incorporated to enable a user to configure and manage the
presentation from a podium or desktop. The touch panel incorporates single screen operation and a
video window that displays current local and remote site transmissions. The touch panel interface is
intuitively designed to maximize presentation effectiveness.
A separate web-based user interface for technician/diagnostic control is available. The primary touch
panel requires an IP connection for web-based control.
TANDBERG Application Module (TAM) MXP
The next-generation TAM MXP enables control of multiple devices, such as room cameras, VCR's,
DVD players, document cameras.
TANDBERG 6000 MXP Codec
The Codec is the heart of the system. The main task for the Codec is the compression of outgoing
video, audio and data, the transmission of this information to the far end and the decompression of the
incoming information -- hence the name Codec; compression and decompression.
D50326.05
INTRODUCTION
11