4.4 Utilities
There are a number of setup options and configurations that can be utilized to customize and configure your
system.
Press the UTILITIES button to enter the utilities and setup page.
Logs off and places the System in 'standby' mode. You will be returned to the 'start' page.
Standby/Log-off
Provides basic system information
System Information
Allows for further setup and configuration options. See
System Setup
STREAM CONTROLS and TELEPHONE ADD-ON behave the same way as the Call Utility functions -- press
Secondary
to activate.
Communications
Press to enable/disable Pressure Mats.
System Tools
DO NOT DISTURB: press to activate 'Do Not Disturb'. While this is active, you will NOT accept (auto-
Configuration
answer) any incoming calls.
AUTO ANSWER: press to activate (green) 'Auto Answer'. When not activated, you must manually accept
any incoming calls.
You may also configure 'Auto Answer' with the Mic on or off when it connects.
Returns to the MAIN conference page.
Return
TANDBERG Educator MXP & Professional MXP Videoconferencing System
4.4.1 System
Setup.
44