Basic Counting Using The Sample Size Key - Setra Systems Quick Count Operator's Manual

BASIC COUNTING USING THE SAMPLE SIZE KEY

To count a number of like objects on the scale, use the following
procedure:
1. Place an empty container on the scale. Press the zero key.
------------------------------------------------------------------------
2. Press the sample size key. Each time the key is pressed the requested
sample size will increase (i.e., Add 10, 25, 50, 100 PCs).
------------------------------------------------------------------------
3. Place the requested number of pieces in the container. Press the
count key.
------------------------------------------------------------------------
4. Fill the container to the desired number of pieces.
------------------------------------------------------------------------
Press the print key to generate a tape/label or to transmit the
5.
data from the RS-232 port.
------------------------------------------------------------------------
6. Remove the pieces from the container and press the clear key to
return the scale to the weight display.
Setra Quick Count™ Operator's Manual
sample
zero count print
size
sample
zero count print
size
sample
zero count print
size
sample
zero count print
size
sample
zero count print
size
sample
zero count print
size
0.00 g
clear
Add 10 Pc
clear
10 Pc
clear
202 Pc
clear
clear
278 Pc
Tape/Label
0.00 g
clear
9