Section Three; Using Your Scale; Basic Weighing; Converting The Weighing Units - Setra Systems Quick Count Operator's Manual

BASIC WEIGHING

To weigh a sample on your scale, use the following procedure:
1. Press the zero key.
2. Place the object(s) to be weighed on the pan.
3. Wait for the " OK" symbol, then read the weight from the display.

CONVERTING THE WEIGHING UNITS

Your Quick Count scale is capable of weighing in any of the units listed
in the DISPLAY SYMBOLS portion of this guide. To convert from one unit
to another, simply press the units key. Each time you press the key the
display is converted to the next unit in line. Continue pressing the key
until the units you wish to use are displayed. The order of units is as
follows: GRAMS - OUNCES - POUNDS - TROY OUNCES - PENNYWEIGHTS - CARATS -
GRAMS.
It is possible to limit which units of measure are displayed when the
units key is repeatedly pressed. The units of measure can be limited to
two, three, four, etc. or it can be entirely disabled so that only one
unit of measure can be used. Contact your local Authorized Setra dealer
for more information, or refer to the Setra Quick Count Technician's
Guide.

WEIGHING WITH A CONTAINER

You can use your scale to weigh objects (or liquids) by placing or
pouring them into a container. To weigh objects or liquids in this
manner, WITHOUT including the weight of the container, use the following
procedure:
1. Press the zero key. Place the empty container on the pan.
2. Press the zero key again.
3. Wait for the " OK"
the container.
4. Wait for the " OK"
display.
8
symbol. Place or pour objects or liquids into
symbol, then read the net weight from the
Setra Quick Count™ Operator's Manual

Section Three

Using Your Scale