Receiving Calls - Siemens euroset 3015 User Manual

• 23 French language
• 24 Portuguese language
• 31 1 seconds pause time
• 32 2 seconds pause time
:
• 33 3 seconds pause time
• 34 4 seconds pause time
• 99 returns to the default
configuration
Press the MENU key
Note:
If a configuration is made by mistake use
the code 99 to return to the default
configuration.

Receiving calls

When you receive a call, the telephone will
emit a warning tone with the melody and
the volume selected. To answer the call, lift
the handset or press the HANDS-FREE key
to activate the hands free.
Dialing call numbers
Using the numeric keypad to make a call
Lift the handset or press the HANDS-
or
FREE key and wait for the line tone
Dial the desired number using the
:
numeric keypad
When you dial, the individual digits of the
number dialed will appear on the display
(position 13 on page 3) and the call will be
initiated. . If the dialed number is recorded
in the Phonebook, the display will show the
name associated to this number (position
14 on page 3).
After a few seconds, the display no longer
shows the number dialed, but the call timer
with MM:SS (minutes and seconds) format.
Using the Phonebook to make a call
Lift the handset or press the HANDS-
or
FREE key and wait for the line tone
Press the PHONEBOOK key
Use the ARROW keys to select the
or
desired register or use the numeric
keypad (see item Consulting the
:
Phonebook on page 9)
Press the DIAL key
Using the Memories to make a call
Lift the handset or press the HANDS-
or
FREE key and wait for the line tone
Press the desired memory (position 12
on page 3)
Using the REDIAL key
Lift the handset or press the HANDS-
or
FREE key and wait for the line tone
Press the REDIAL key
Note:
If the last number dialed contains more
than 32 digits, the REDIAL function will not
work properly.
MUTE key
When you press the MUTE key
call, the microphone is switched off and the
other party cannot hear you. The MUTE
message will appear on the display while
MUTE is activated. To resume a normal
6
during a