TIPTEL IP 286 Auto Provision Manual page 31

Write the relevant parameter on "DKtype =" "Line = " "Value = " "Type =" "PickupValue = ". For
details please see the list below.
type
Line
Value
PickupValue
DKtype
Tiptel b.v.
Camerastraat 2
1336 BC Almere
It is used when configuring a DSS
Key as BLF or Shared Line.
blf or bla blf stands for BLF.
bla stands for Shared Line.
No default value.
Seen from the web, it reflects the
value under Line title.
It defines the Line you are going to
use for a specific function (if the
function needs to specify a line).
Integer from 0 to
Normally,0 stands for Auto,1 stands
max line number
for Line1 and so on.
However, it‟s a little different when
configured as bla or blf in which case
0 stands for Line1, 1 stands for Line2
and so on. The default is 0.
Seen from the web, it reflects the
value under Extension title.
Normally, the value is an extension
It depends number while in some cases it‟s not.
For example, when you configure a
key as URL, the value must be a url
string. No default value.
It is used only for BLF. It defines the
string pickup number that your server
allocates.
It‟s a number reflects the key
function.
0:N/A
2:Forward
4:Hold
6:Redial
8:SMS
10:Call Park 11:Custom
Integer
12:Voicemail 13:SpeedDial
14:Intercom 15:Line(for line key
16:BLF
18:Group Listening
20:Private Hold
The default is 0.
31
www.tiptel.nl
1:Conference
3:Transfer
5:DND
7:Call Return
9:Call Pickup
only)
17:URL
19:Public
Hold
Tel: 036 53 666 50
Fax: 036 53 678 81