TIPTEL IP 286 Auto Provision Manual page 15

[ account ]
path =
/config/voip/sipAccount1.cfg
[ DTMF ]
path =
/config/voip/sipAccount0.cfg
[ NAT ]
path =
/config/voip/sipAccount0.cfg
Tiptel b.v.
Camerastraat 2
1336 BC Almere
srtp_encryption
ptime
ShareLine
dialoginfo_callpickup
For different models, there‟re different numbers of Account. For each Account,
there are completely same parameters and they share same permitted values
and default values. The difference is just on the path. For example, the path of
Account1 is path = /config/voip/sipAccount0.cfg.While for
Account2 is path = /config/voip/sipAccount1.cfg,and other sections alike.
DTMFInbandTransfer
InfoType
DTMFPayload
NATTraversal
15
It defines the value of Voice
Encryption (SRTP) of account1.
0 or 1 0 stands for off.
1 stands for on.
The default is 0.
It defines the value of ptime of
account1.
0,10,20,30 0 stands for Disabled.
,40,50 or 10 stands for 10ms.
60 20 stands for 20ms.
And alike.
The default is 0.
It defines the value of Shared Line
of account1.
0 or 1 0 stands for Disabled.
1 stands for Enabled.
The default is 0.
It defines the value of Dialog-Info
Call Pickup of account1.
0 or 1
0 stands for Disabled.
1 stands for Enabled.
It defines the value of DTMF Type of
account1.
0 stands for INBAND.
0,1 or 2
1 stands for RFC2833.
2 stands for SIP INFO.
The default is 1.
It defines the value of How to INFO
DTMF of account1.
0 stands for Disabled.
0,1,2 or 3 1 stands for DTMF-Relay.
2 stands for DTMF.
3 stands for Telephone-Event.
The default is Disabled.
Integer It defines the value of DTMF
from 96 to Payload of account1.
255 The default is 101.
It defines the value of NAT
0 or 1 Traversal of account1.
0 stands for Disabled.
www.tiptel.nl
Tel: 036 53 666 50
Fax: 036 53 678 81