License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license
plate lamps to the liftgate trim.
2. Turn and pull the license plate lamp forward
through the lift gate trim opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse steps 1 – 3 to reinstall the license
plate lamp.
Replacement Bulbs
Exterior Lamp
License Plate Lamp
Rear Turn Signal, Stoplamp, and
Taillamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
W5W
3057
5-49