Testing The Alarm - Buick Enclave 2008 Owner's Manual

Hide thumbs Also See for Enclave 2008:
Table of Contents

Advertisement

Here is how to avoid setting off the alarm by accident:
If you do not want to activate the theft-deterrent
system, the vehicle should be locked with the
door key after the doors are closed.
Always unlock a door with the RKE transmitter.
Unlocking a door any other way will set off the alarm
if the system has been armed.
If you set off the alarm by accident, turn off the alarm by
pressing unlock on the RKE transmitter or by placing
the key in the ignition and turning it to START.

Testing the Alarm

The alarm can be tested by following these steps:
1. From inside the vehicle, lower the driver's window
and open the driver's door.
2. Activate the system by locking the doors with the
RKE transmitter.
3. Get out of the vehicle, close the door and wait for
the security light to go out.
4. Then reach in through the window, unlock the
door with the manual door lock and open the
door. This should set off the alarm.
If the alarm does not sound when it should, but the
vehicle's headlamps flash, check to see if the horn
works. The horn fuse may be blown. To replace the
fuse, see Fuses and Circuit Breakers on page 5-100.
If the alarm does not sound or the vehicle's headlamps
do not flash, see your dealer/retailer for service.
2-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents