Download Print this page

Buick 2007 Rendezvous Owner's Manual

Buick 2007 Rendezvous Owner's Manual

Hide thumbs Also See for 2007 Rendezvous:

Getting to know manual (20 pages)

,

Quick start manual (2 pages)

page of 528

/ 528
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

2007 Buick Rendezvous Owner Manual

Seats and Restraint Systems ....................... 7

.............................................. 9

............................................. 15

............................................ 30

Child Restraints

........................................ 88

Restraint System Check

Features and Controls .............................. 107

..................................................... 109

Doors and Locks

............................................... 120

Theft-Deterrent Systems

Starting and Operating Your Vehicle

.................................................. 142

®

System

Universal Home Remote System

...................................... 158

................................................ 169

...................................... 57

....................... 104

.................................. 114

....................... 122

..... 127

................................... 144

.......... 147

Instrument Panel ....................................... 171

Instrument Panel Overview

Climate Controls

Warning Lights, Gages, and

.......................................... 211

Driver Information Center (DIC)

Audio System(s)

Driving Your Vehicle ................................. 301

Your Driving, the Road, and

..................................... 302

................................................. 337

Service and Appearance Care .................. 351

................................................. 354

...................................................... 356

Checking Things Under the Hood

Bulb Replacement

Windshield Replacement

M

................... 174

................................... 200

................................... 225

............ 235

................................... 250

......... 362

................................ 399

....................... 404

1

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the 2007 Rendezvous and is the answer not in the manual?

Questions and answers

Summary of Contents for Buick 2007 Rendezvous

Page 1: Table Of Contents
2007 Buick Rendezvous Owner Manual Seats and Restraint Systems ... 7 Front Seats ... 9 Rear Seats ... 15 Safety Belts ... 30 Child Restraints ... 57 Airbag System ... 88 Restraint System Check Features and Controls ... 107 Keys ...
Page 2 Windshield Wiper Blade Replacement ... 404 Tires ... 406 Appearance Care ... 451 Vehicle Identiﬁcation ... 461 Electrical System ... 462 Capacities and Speciﬁcations Maintenance Schedule ... 471 Maintenance Schedule Customer Assistance Information ... 491 Customer Assistance and Information Reporting Safety Defects ...
Page 3: Canadian Owners
For vehicles ﬁrst sold in Canada, substitute the name “General Motors of Canada Limited” for Buick Motor Division whenever it appears in this manual. Litho in U.S.A. Part No. 15860822 A First Printing...
Page 4: How To Use This Manual
How to Use This Manual Many people read the owner manual from beginning to end when they ﬁrst receive their new vehicle. If this is done, it can help you learn about the features and controls for the vehicle. Pictures and words work together in the owner manual to explain things.
Page 5: Vehicle Damage Warnings
Vehicle Damage Warnings Also, in this manual you will ﬁnd these notices: Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly.
Page 6 These are some examples of symbols that may be found on the vehicle:...
Page 7: Seats And Restraint Systems
Section 1 Front Seats ... 9 Manual Seats ... 9 Power Seats ... 10 Manual Lumbar ... 10 Heated Seats ... 11 Memory Seat and Mirrors ... 11 Reclining Seatbacks ... 13 Head Restraints ... 15 Rear Seats ... 15 Rear Seat Operation ...
Page 8 Section 1 Airbag System ... 88 Where Are the Airbags? ... 91 When Should an Airbag Inﬂate? ... 93 What Makes an Airbag Inﬂate? ... 95 How Does an Airbag Restrain? ... 96 What Will You See After an Airbag Inﬂates? ...
Page 9: Manual Seats
Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Page 10: Power Seats
Power Seats If the vehicle has power seats, the controls used to operate them are located on the outboard side of the seats. To adjust the seat, do any of the following: • Move the seat forward or rearward by sliding the control forward or rearward.
Page 11: Memory Seat And Mirrors
Heated Seats Your vehicle may have heated seats. If it does, the heated seat switches are located in the instrument panel switchbank. This feature will quickly heat the seat cushions and lower back of the driver’s and front passenger’s seat. The left switch is for the driver’s seat and the right switch is for the front passenger’s seat.
Page 12 To store the memory settings, do the following: 1. Adjust the driver’s seat and the outside rearview mirrors to the position you would like for driving. 2. Press and hold memory button 1 for more than three seconds. A double beep will sound when the memory seat and mirror position have been stored.
Page 13: Reclining Seatbacks
Reclining Seatbacks CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Page 14 To return the seatback to an upright position, do the following: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked.
Page 15: Rear Seat Operation
Head Restraints Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash. Pull the head restraint up or push it down to adjust it.
Page 16: Folding Or Reclining The Seatbacks
Folding or Reclining the Seatbacks CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked. To recline the seatback on base-level split bench seats, lift...
Page 17: Removing The Split Bench Seat
The seatback will lock into place when you push it back to the upright position. After raising a seatback to an upright position, push and pull on the seatback to make sure that it is locked in place. Removing the Split Bench Seat Each section of the split bench seat can be ﬂipped forward or removed individually.
Page 18 For up-level split bench seats, continue pushing forward on the recliner lever to release the rear latches from the ﬂoor pins and ﬂip the seat forward. 5. To release the front latches, squeeze the angled latch release bar toward the straight crossbar.
Page 19: Replacing The Split Bench Seat
Replacing the Split Bench Seat CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked. CAUTION: A seat that is not locked into place properly can move around in a collision or...
Page 20 The split bench seat sections have seat position labels, located on the back of each section, showing where the section must go. The seat must be placed in the proper location for the legs to attach correctly. 1. Squeeze the angled latch release bar toward the straight crossbar while placing the front hooks of the bench seat onto the front two ﬂoor pins.
Page 21: Captain Chairs
3. Firmly push the rear hooks onto the rear ﬂoor pins by pushing down on the rear of the seat. 4. Try to raise the seat to check that it is locked down. 5. Lift the seatback recliner lever and raise the seatback until it locks upright.
Page 22 Folding or Reclining the Seatbacks CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked. To recline the seatback, lift the recliner lever located on the outboard side of the seatback.
Page 23 Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. To fold the seatback forward, lift the recliner lever, located on the outboard side of the seatback, fully without applying pressure to the seatback.
Page 24 3. The seat can then be lifted off the front ﬂoor pins. 4. Remove the seat by rocking it slightly toward the rear of the vehicle and then pulling it out. Installing the Captain Chairs CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash.
Page 25 Do not put the seats in so that they face rearward because they will not latch that way. The captain chairs have seat position labels, located on the back of each seat, showing where that seat must go. The seat must be placed in the proper location for the legs to attach correctly.
Page 26: Stowable Seat
3. Push the rear of the seat down to lock the rear latches onto the rear set of ﬂoor pins. CAUTION: A seat that is not locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured.
Page 27: Folding The Seatback
Folding the Seatback Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. To fold the seatback forward, lift the lever located on the back of...
Page 28: Removing The Stowable Seat
Removing the Stowable Seat 1. Remove the convenience center, if it is in the vehicle. See Rear Convenience Center on page 165. 2. Make sure all items are off the stowable seat. 3. From the front of the seat, remove the two nuts, located on the ﬂoor on each side of the seat.
Page 29 The stowable seat has seat position labels, located on the back of the seat, showing where the seat must go. The seat must be placed in the proper location for the legs to attach correctly. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts.
Page 30: Safety Belts
Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. CAUTION: Do not let anyone ride where he or she cannot wear a safety belt properly.
Page 31: Why Safety Belts Work
You never know if you will be in a crash. If you do have a crash, you do not know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive.
Page 32 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop.
Page 33 The person keeps going until stopped by or the instrument panel... something. In a real vehicle, it could be the windshield...
Page 34: Questions And Answers About Safety Belts
or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and Answers About Safety Belts Will I be trapped in the vehicle after an...
Page 35: How To Wear Safety Belts Properly
If I am a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you are in an accident — even one that is not your fault — you and your passengers can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers.
Page 36: Driver Position
Driver Position Lap-Shoulder Belt The driver has a lap-shoulder belt. Here is how to wear it properly. 1. Close and lock the door. 2. Adjust the seat so you can sit up straight. To see how, see “Seats” in the Index. 3.
Page 37 4. Push the latch plate into the buckle until it clicks. If the belt stops before it reaches the buckle, tilt the latch plate and keep pulling until you can buckle it. Pull up on the latch plate to make sure it is secure.
Page 38 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 39 What is wrong with this? The shoulder belt is too loose. It will not give nearly as much protection this way. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 40 What is wrong with this? The lap belt is too loose. It will not give nearly as much protection this way. CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force at your abdomen.
Page 41 What is wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen.
Page 42 What is wrong with this? The belt is over an armrest. CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
Page 43 What is wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
Page 44 What is wrong with this? The belt is twisted across the body. CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to ﬁx it.
Page 45: Shoulder Belt Height Adjustment
To unlatch the belt, push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
Page 46: Safety Belt Use During Pregnancy
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
Page 47: Rear Outside Passenger Positions
Rear Outside Passenger Positions It is very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who are not safety belted can be thrown out of the vehicle in a crash.
Page 48 2. Push the latch plate into the buckle until it clicks. If the belt stops before it reaches the buckle, tilt the latch plate and keep pulling until you can buckle it. Pull up on the latch plate to make sure it is secure.
Page 49 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 50 The safety belt locks if there is a sudden stop or a crash, or if you pull the belt very quickly out of the retractor. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 51: Center Rear Passenger Position Lap-Shoulder Belt
Center Rear Passenger Position Lap-Shoulder Belt If your vehicle has a bench seat, someone can sit in the center position. When you sit in the center seating position, you have a lap safety belt, which has no retractor. You also have a shoulder belt, which has a retractor. In order to have the protection of the shoulder belt, you must ﬁrst connect it to the lap belt.
Page 52 2. Insert the metal knob on the shoulder belt into 3. To make the lap belt longer, tilt the latch plate the keyhole on the lap belt buckle as shown. and pull it along the belt. Be sure to slide the shoulder belt part into the keyhole until it locks into place.
Page 53: Rear Safety Belt Comfort Guides
To make the belt shorter, pull its free end as shown until the belt is snug 4. Buckle, position and release the lap-shoulder belt the same way as the other lap-shoulder belts. If the belt is not long enough, see Safety Belt Extender on page 56.
Page 54 For second row center position do the following: Second Row Center Position 1. Remove the elastic cord from under the head restraint of the second row, driver’s side position. 2. Attach the elastic cord to the comfort guide on the center passenger shoulder belt.
Page 55 3. Be sure that the belt is not twisted and it lies ﬂat. The guide must be on top of the belt. CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured.
Page 56: Safety Belt Pretensioners
Safety Belt Pretensioners Your vehicle has safety belt pretensioners for the driver and right front passenger. Although you cannot see them, they are located on the retractor part of the safety belts. They help the safety belts reduce a person’s forward movement in a moderate to severe frontal or near frontal crash.
Page 57: Older Children
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. What is the proper way to wear safety belts? An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
Page 58 CAUTION: Never do this. Here two children are wearing the same belt. The belt can not properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time.
Page 59 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
Page 60: Infants And Young Children
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
Page 61 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240 lb (110 kg) force...
Page 62 CAUTION: Children who are up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 63 For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards.
Page 64: Child Restraint Systems
Child Restraint Systems An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous ﬂat surface. Make sure that the infant’s head rests toward the center of the vehicle.
Page 65 A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields. A booster seat (F-G) is a child restraint designed to improve the ﬁt of the vehicle’s safety belt system.
Page 66 How Should I Use a Child Restraint? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner.
Page 67: Securing The Child Within The Child Restraint
When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer.
Page 68: Where To Put The Restraint
Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that child restraints be secured in a rear seat, including an infant riding in a rear-facing infant seat, a child riding in a forward-facing child seat and an older child riding in a booster seat.
Page 69: Lower Anchors And Tethers For Children (Latch)
Lower Anchors and Tethers for Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system Make sure that a LATCH-compatible child restraint...
Page 70 Top Tether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
Page 71 Lower Anchor and Top Tether Anchor Locations Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. Second Row — Captains Chairs (Top Tether Anchor): Second Row — (Top Tether Anchor): Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors.
Page 72 To assist you in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion. To assist you in locating the top tether anchors, look for this symbol. For the third row, the top tether anchor symbol is located on the ﬂap of carpet behind the seat.
Page 73 Second Row Outside Position Bench Seat For second row outboard seating positions, the top tether anchors are exposed and located at the rear of the seat cushions. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.
Page 74 Second Row Center Position Bench Seat with Third Row Seat If the vehicle has a third row seat and the seatback is upright, there is an anchor strap located between the third row seatback and cushion to anchor the child restraint for the second row center position bench seat.
Page 75 See Securing a Child Restraint in a Rear Outside Seat Position on page 79 for more information including important safety information. Third Row If the vehicle has a third row, there is a top tether anchor for the third row passenger’s side position.
Page 76 Securing a Child Restraint Designed for the LATCH System CAUTION: If a LATCH-type child restraint is not attached to anchors, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed.
Page 77 CAUTION: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Secure any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been...
Page 78 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. 2.2.
Page 79: Securing A Child Restraint In A Rear Outside Seat Position
If the position you are using has an adjustable head restraint and you are using a dual tether, route the tether around the head restraint. If the position you are using has an adjustable head restraint and you are using a single tether, route the tether under the head restraint and in between the head...
Page 80 Secure the child in the child restraint when and as the instructions say. 1. Put the child restraint on the seat. 2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how.
Page 81 4. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 82: Securing A Child Restraint In The Center Rear Seat Position
Securing a Child Restraint in the Center Rear Seat Position If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 69. If your child restraint does not have the LATCH system, you will be using the lap-shoulder belt to secure the child restraint in the center rear seating position.
Page 83 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 5. To tighten the belt, pull its free end while you push down on the child restraint. If you are using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push the child restraint as you tighten the belt.
Page 84: Securing A Child Restraint In The Right Front Seat Position
Securing a Child Restraint in the Right Front Seat Position Your vehicle has a right front passenger airbag. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint on page 68. In addition, your vehicle has the passenger sensing system.
Page 85 If you need to secure a forward-facing child restraint in the right front seat position, move the seat as far back as it will go before securing the forward-facing child restraint. See Manual Seats on page 9 or Power Seats on page 10. If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 69.
Page 86 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 87 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 88: Airbag System
Airbag System Your vehicle has a frontal airbag for the driver and a frontal airbag for the right front passenger. Your vehicle may also have side impact airbags. Side impact airbags are available for the driver and right front passenger. If your vehicle has a side impact airbag for the driver and/or the right front passenger, the word AIRBAG will appear on the airbag covering on the...
Page 89 CAUTION: (Continued) inﬂate in rollover, rear crashes, or in many side crashes. And, for some unrestrained occupants, frontal airbags may provide less protection in frontal crashes than more forceful airbags have provided in the past. Side impact airbags are designed to inﬂate in moderate to severe crashes where something hits the side of your vehicle.
Page 90 CAUTION: Anyone who is up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 91: Where Are The Airbags
Where Are the Airbags? The driver’s frontal airbag is in the middle of the steering wheel. The right front passenger’s frontal airbag is in the instrument panel on the passenger’s side.
Page 92 If your vehicle has one, the driver’s side impact airbag is in the side of the driver’s seatback closest to the door. If your vehicle has one, the right front passenger’s side impact airbag is in the side of the passenger’s seatback closest to the door.
Page 93: When Should An Airbag Inﬂate
CAUTION: If something is between an occupant and an airbag, the airbag might not inﬂate properly or it might force the object into that person causing severe injury or even death. The path of an inﬂating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any...
Page 94 In addition, your vehicle has “dual stage” frontal airbags, which adjust the restraint according to crash severity. Your vehicle has electronic frontal sensors which help the sensing system distinguish between a moderate and a more severe frontal impact. For moderate frontal impacts, these airbags inﬂate at a level less than full deployment.
Page 95: What Makes An Airbag Inﬂate
Your vehicle may or may not have side impact airbags. See Airbag System on page 88 for more information. Side impact airbags are intended to inﬂate in moderate to severe side crashes. A side impact airbag will inﬂate if the crash severity is above the system’s designed “threshold level.”...
Page 96: How Does An Airbag Restrain
How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle. Airbags supplement the protection provided by safety belts.
Page 97 CAUTION: When an airbag inﬂates, there may be dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so.
Page 98: Passenger Sensing System
Passenger Sensing System Your vehicle has a passenger sensing system. The passenger airbag status indicator in the rearview mirror will be visible when you turn your ignition key to ON or START. United States Canada The words ON and OFF or the symbol for on and off, will be visible during the system check.
Page 99 Your vehicle has a rear seat that will accommodate a rear-facing child restraint. A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right...
Page 100 • A right front passenger takes his/her weight off of the seat for a period of time. • The right front passenger seat is occupied by a smaller person, such as a child who has outgrown child restraints. • Or, if there is a critical problem with the airbag system or the passenger sensing system.
Page 101 If a person of adult-size is sitting in the right front passenger’s seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, turn the vehicle off and ask the person to place the seatback in the fully upright position, then sit upright in the seat, centered on the seat cushion, with the person’s legs comfortably...
Page 102: Servicing Your Airbag-Equipped Vehicle
Aftermarket equipment, such as seat covers, can affect how well the passenger sensing system operates. You may want to consider not using seat covers or other aftermarket equipment if your vehicle has the passenger sensing system. See Adding Equipment to Your Airbag-Equipped Vehicle on page 103 for more information about modiﬁcations that can affect how the system operates.
Page 103: Adding Equipment To Your Airbag-Equipped Vehicle
Adding Equipment to Your Airbag-Equipped Vehicle Is there anything I might add to the front or sides of the vehicle that could keep the airbags from working properly? Yes. If you add things that change your vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
Page 104: Restraint System Check
Restraint System Check Checking the Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
Page 105: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts After a Crash CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary...
Page 106 NOTES...
Page 107: Features And Controls
Section 2 Keys ... 109 Remote Keyless Entry System ... 110 Remote Keyless Entry System Operation ... 111 Doors and Locks ... 114 Door Locks ... 114 Power Door Locks ... 115 Delayed Locking ... 116 Programmable Automatic Door Locks ... 116 Rear Door Security Locks ...
Page 108 Section 2 Universal Home Remote System ... 147 Universal Home Remote System (With Three Round LED) ... 147 Universal Home Remote System (With One Triangular LED) ... 148 Universal Home Remote System Operation (With Three Round LED) ... 149 Universal Home Remote System Operation (With One Triangular LED) ...
Page 109: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed. Do not leave the keys in a vehicle with children.
Page 110: Remote Keyless Entry System
Your vehicle has the PASS-Key system. The key has a transponder in the key head that matches a decoder in the vehicle’s steering column. If a replacement key or any additional key is needed, you must purchase this key from your dealer. The key will have ®...
Page 111: Remote Keyless Entry System Operation
At times you may notice a decrease in range. This is normal for any RKE system. If the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this: • Check the distance.
Page 112: Matching Transmitter(S) To Your Vehicle
If you would like to program the way the headlamps and parking lamps operate with remote unlock conﬁrmation, and your vehicle is equipped with the Driver Information Center (DIC), see DIC Vehicle Personalization on page 240. LOCK: To lock all doors, press LOCK. The LOCK button on the remote keyless entry transmitter will arm the content theft-deterrent system.
Page 113: Battery Replacement
Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about three years. United States You can tell the battery is weak if the KEY FOB BATTERY LOW message appears in the message center. If you get this message, the battery in the key fob needs to be replaced.
Page 114: Doors And Locks
Doors and Locks Door Locks CAUTION: Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked.
Page 115: Power Door Locks
To unlock the driver’s door from the outside with the key, insert the key and turn it toward the front of the vehicle. To lock the driver’s door from the outside with your key, insert the key and turn it toward the rear of the vehicle. To unlock either manual locking front door from the inside, pull back...
Page 116: Delayed Locking
Delayed Locking With the delayed locking feature, the doors will not lock immediately when locking the doors using the power door lock switch or when LOCK on the remote keyless entry transmitter is pressed while any door is open. Instead, three chimes will be heard to indicate that the delayed locking feature is in operation.
Page 117: Canceling The Rear Door Security Locks
2. On the inside of the 3. Close the door. 4. Repeat Steps 1 through 3 for the other rear door lock. The rear doors on your vehicle cannot be opened from inside the vehicle when this feature is in use.
Page 118: Lockout Protection
Lockout Protection The lockout protection feature may prevent you from locking your key in your vehicle. Pressing the power door lock switch will lock all doors, then unlock the driver’s door, if the key is in the ignition when a door is opened. If you leave the key in your vehicle but not in the ignition or if you use the manual door lock, you could still lock the key in the vehicle.
Page 119: Liftgate Release
Liftgate Release Liftgate Handle Your vehicle is equipped with a liftgate release touchpad, located on the inner side of the liftgate handle. To open the liftgate using the touchpad, do the following: 1. Put the vehicle in PARK (P). 2. Unlock all of the doors. 3.
Page 120: Windows
Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 121: Power Windows
Power Windows Switches on the driver’s door armrest control each of the windows when the ignition is in ON, ACCESSORY, or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 129 for more information. In addition, each passenger’s door has a window switch.
Page 122: Theft-Deterrent Systems
Sun Visors To block out glare you can swing down the visors. You can also remove them from the center mount and swing them to the side. There may be an extension on the inboard side of the sun visors. Pull the extension out to block out glare. Visor Vanity Mirror Pull down the sun visor.
Page 123: Arming With The Power Lock Switch
When the content theft-deterrent system is armed, the liftgate may be opened by pressing the REAR button on the remote keyless entry transmitter. The alarm will go into standby mode. Once the liftgate is closed, the alarm will be armed. See “Liftgate Release” under Liftgate on page 118 for more information on how to open the liftgate.
Page 124 Disarming with the Remote Keyless Entry Transmitter Your alarm system will disarm when you press UNLOCK on your remote keyless entry transmitter to unlock the doors. The security light, on top of the instrument panel, will stop ﬂashing to let you know the system is no longer armed.
Page 125: Pass-Key
® PASS-Key III Operation Your vehicle is equipped with the PASS-Key (Personalized Automotive Security System) theft-deterrent system. ® PASS-Key III is a passive theft deterrent system. This means you do not have to do anything different to arm or disarm the system. It works when you insert or remove the key from the ignition.
Page 126 It is possible for the PASS-Key program the transponder value of a new or replacement key. Up to 10 additional keys may be programmed for the vehicle. This procedure is for programming additional keys only. If all the currently programmed keys are lost or do not operate, you must see your GM dealer or a locksmith who can service PASS-Key keys made and programmed to the system.
Page 127: Starting And Operating Your Vehicle
If you lose or damage a PASS-Key your GM dealer who can service PASS-Key have a new key made. Starting and Operating Your Vehicle New Vehicle Break-In Notice: Your vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: •...
Page 128: Ignition Positions
Ignition Positions With the key in the ignition, you can turn it to four different positions. A (OFF): This is the only position in which you can remove the key. This position locks the ignition and transaxle. Notice: Using a tool to force the key from the ignition switch could cause damage or break the key.
Page 129: Key In The Ignition
Key In the Ignition Never leave your vehicle with the keys inside, as it is an easy target for joy riders or thieves. If you leave the key in the ignition and park your vehicle, a chime will sound, when you open the driver’s door.
Page 130 Your vehicle has a Computer-Controlled Cranking System. This feature assists in starting the engine and protects the electrical system. If the ignition key is turned to the START position, and then released when the engine begins cranking, the engine will continue cranking until the vehicle starts or until it exceeds the maximum cranking time allowed, approximately 15 seconds to...
Page 131: To Use The Engine Coolant Heater
Engine Coolant Heater Your vehicle may have an engine coolant heater. In very cold weather, 0°F ( 18°C) or colder, the engine coolant heater can help. You will get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle.
Page 132: Automatic Transaxle Operation
Automatic Transaxle Operation Maximum engine speed is limited when you are in PARK (P) or NEUTRAL (N), to protect driveline components from improper operation. There are several different positions for your shift lever. PARK (P): This gear position locks your front wheels.
Page 133 CAUTION: (Continued) Do not leave your vehicle when the engine is running unless you have to. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure your vehicle will not move, even when you are on fairly level ground, always set your parking brake and move the shift lever to PARK (P).
Page 134: Warm-Up Shift
DRIVE (D): This position is for normal driving. It provides the best fuel economy for your vehicle. If you need more power for passing, and you are: • Going less than 35 mph (55 km/h), push your accelerator pedal about halfway down. •...
Page 135: Parking Brake
Notice: Driving in SECOND (2) for more than 25 miles (40 km) or at speeds over 55 mph (90 km/h) may damage the transaxle. Also, shifting into SECOND (2) at speeds above 65 mph (105 km/h) can cause damage. Drive in THIRD (3) or DRIVE (D) instead of SECOND (2).
Page 136: Shifting Into Park (P)
To release the parking brake, hold the regular brake pedal down with your right foot while you push down on the parking brake pedal with your left foot. When you lift your left foot from the parking brake pedal, it will pop up to the released position.
Page 137: Leaving Your Vehicle With The Engine Running
Leaving Your Vehicle With the Engine Running CAUTION: It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch ﬁre.
Page 138: Shifting Out Of Park (P)
Shifting Out of Park (P) Your vehicle has an automatic transaxle shift lock control system which locks the shift lever in PARK (P) when the ignition is in the OFF position. In addition, you must fully apply your regular brakes before you can shift from PARK (P), when the ignition is in the ON position.
Page 139: Parking Over Things That Burn
Parking Over Things That Burn CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn.
Page 140: Engine Exhaust
Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: • Your exhaust system sounds strange or different. •...
Page 141: Running The Engine While Parked
Running the Engine While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle.
Page 142: Mirrors
Mirrors Manual Rearview Mirror The vehicle may have a rearview mirror that can be adjusted for day or night driving. Push or pull the tab at the bottom of the mirror to adjust it for day or night conditions. The mirror’s two outer buttons operate the lamps on the bottom of the mirror.
Page 143: Outside Curb View Assist Mirror
Outside Curb View Assist Mirror If the vehicle has this feature, it can be helpful when parallel parking. The passenger’s outside rearview mirror will tilt towards the curb when the vehicle is shifted into REVERSE (R) and return to its previous position when the vehicle is shifted out of REVERSE (R).
Page 144: Onstar System
® OnStar System ® OnStar uses several innovative technologies and live advisors to provide you with a wide range of safety, security, information, and convenience services. If your airbags deploy, the system is designed to make an automatic call to OnStar Emergency advisors who can request emergency services be sent to your location.
Page 145 Available Services with Safe & ® Sound Plan • Automatic Notiﬁcation of Airbag Deployment • Advanced Automatic Crash Notiﬁcation (AACN) (If equipped) • Link to Emergency Services • Roadside Assistance • Stolen Vehicle Location Assistance • AccidentAssist • Remote Door Unlock/Vehicle Alert ®...
Page 146 ® OnStar Virtual Advisor ® OnStar Virtual Advisor is a feature of OnStar Hands-Free Calling that uses your minutes to access location-based weather, local traffic reports, and stock quotes. By pressing the phone button and giving a few simple voice commands, you can browse through the various topics.
Page 147: Universal Home Remote System
® OnStar service that involves location information about your vehicle cannot work unless GPS satellite signals are unobstructed and available in that place as well. Your vehicle must have a working electrical system (including adequate battery power) for the ® OnStar equipment to operate.
Page 148: Universal Home Remote System (With One Triangular Led)
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device. The Canadian Registration ID number is 3521A-GTE05A.
Page 149: Universal Home Remote System Operation (With Three Round Led)
Universal Home Remote System Operation (With Three Round LED) Your vehicle may have the Universal Home Remote System. If there are three round Light Emitting Diode (LED) above the Universal Home Remote System buttons, follow the instructions below. If there is one triangular LED above the Universal Home Remote System buttons, follow the instructions under Universal Home Remote System Operation (with one triangular LED).
Page 150 If you do not know if your garage door opener is a ﬁxed code or rolling code device, open your garage door opener’s remote control battery cover. Your garage door opener is a ﬁxed code device if there is a panel of switches. If not, your garage door opener is a rolling code device.
Page 151 Follow these steps to program up to three channels: 1. Remove the battery cover of the hand-held transmitter. Example of Switch Settings 2. Write down the eight to 12 coding switch settings from left to right. When the switch is in the up position, write “on,” and when a switch is in the down position, write “off”.
Page 152 5. After entering the switch settings, press and release all three buttons at the same time. The indicator lights will turn on. 6. Press and hold the button you would like to use to control the garage door until the garage door moves.
Page 153: Using Universal Home Remote
2. Go to the garage. Locate the garage door motor head and press and release the “learn” button. After pressing the “learn” button, you have 10 to 30 seconds to complete Step 4 depending on your garage control unit. If you cannot locate the “learn”...
Page 154: Erasing Universal Home Remote Buttons
Reprogramming Universal Home Remote Buttons You can reprogram any of the three buttons by repeating the instructions. Erasing Universal Home Remote Buttons You should erase the programmed buttons when you sell the vehicle or terminate your lease. To erase either rolling code or ﬁxed code on the Universal Home Remote device, do the following: 1.
Page 155 Read the instructions completely before attempting to program the Universal Home Remote. Because of the steps involved, it may be helpful to have another person available to assist you in the programming steps. Keep the original hand-held transmitter for use in other vehicles as well as for future Universal Home Remote programming.
Page 156 4. The indicator light will ﬂash slowly at ﬁrst and then rapidly after Universal Home Remote successfully receives the frequency signal from the hand-held transmitter. Release both buttons. 5. Press and hold the newly-trained Universal Home Remote button and observe the indicator light.
Page 157: Gate Operator And Canadian Programming
Gate Operator and Canadian Programming Canadian radio-frequency laws require transmitter signals to time out or quit after several seconds of transmission. This may not be long enough for Universal Home Remote to pick up the signal during programming. Similarly, some U.S. gate operators are manufactured to time out in the same manner.
Page 158: Storage Areas
Reprogramming a Single Universal Home Remote Button To program a device to Universal Home Remote using a Universal Home Remote button previously trained, follow these steps: 1. Press and hold the desired Universal Home Remote button. Do not release the button. 2.
Page 159: Cell Phone Storage Area
Your vehicle has cupholders located in the rear seat armrests if it has a split folding rear seat. If your vehicle has captain’s chairs, there are cupholders on the sides of the seats. If your vehicle has a stowable seat, there are cupholders in the center of the seat.
Page 160: Floor Console Storage Area
Floor Console Storage Area The ﬂoor console storage area contains two cupholders, an ashtray, and a cellular phone storage compartment with a cigarette lighter/accessory power outlet. Below the ﬂoor console storage, there is another storage area with two integrated convenience nets. Front Armrest Storage Area Your vehicle has a front armrest storage compartment which contains two storage...
Page 161: Roof Rack System
Roof Rack System CAUTION: If you try to carry something on top of your vehicle that is longer or wider than the luggage carrier — like paneling, plywood, a mattress and so forth — the wind can catch it as you drive along. This can cause you to lose control.
Page 162 Notice: Loading cargo on the luggage carrier that weighs more than 220 lbs (100 kg) or hangs over the rear or sides of the vehicle may damage your vehicle. Load cargo so that it rests on the slats as far forward as possible and against the side rails, making sure to fasten it securely.
Page 163 Your luggage carrier has release levers within the end of each crossrail support. To adjust the crossrail(s), the sunroof stop (A), if the vehicle has one, must be removed. To remove the sunroof stop, do the following: 1. Find the tool (B) located in a bag in the glove box labeled TOOL KIT-ACSRY.
Page 164: Convenience Net
To adjust the crossrails, lift the release levers on each side to unlock them. Slide the crossrails forward or backward, as needed, to accommodate loads of various sizes. After repositioning the crossrails, push the release lever down. This will lock the crossrails in place. Notice: Opening the sunroof when the luggage rack crossrails are not in the full-rear position could cause damage to the sunroof...
Page 165: Cargo Cover
Cargo Cover If your vehicle has a cargo cover, you can use it to cover items in the rear of the vehicle. Remove the cover from its pouch and place the loops found on each corner of the cover, over the four pegs in each corner of the rear if the vehicle.
Page 166 The extended rear convenience center, without the optional third row stowable seat, has a forward bin and rear bin. The rear convenience center, with the optional third row stowable seat, contains one storage bin. To use the convenience center, remove the carpeted mat and lift the handle(s) on the top of the lid to open the storage bin.
Page 167 Reinstalling the Extended Rear Convenience Center 1. Make sure that all items have been removed from the rear of the vehicle. 2. Remove the carpeted mat from the vehicle. 3. Lift the forward bin into the back of the vehicle. Place the mounting brackets onto the forward mounting bolts on the ﬂoor of the vehicle.
Page 168 Removing the Rear Convenience Center on Vehicles with the Third Row Stowable Seat 1. Make sure that all items have been removed from the top and the inside of the rear convenience center. 2. Lift the handle(s) on the top of the lid to open the storage bin.
Page 169: Sunroof
Sunroof If the vehicle has a sunroof, the switch to operate it is located on the headliner, between the sun visors. The sunroof switch will only work when the ignition is ON or when the ignition is OFF and Retained Accessory Power (RAP) is active.
Page 170 NOTES...
Page 171: Instrument Panel
Section 3 Instrument Panel Overview ... 174 Hazard Warning Flashers ... 176 Other Warning Devices ... 176 Horn ... 176 Tilt Wheel ... 177 Turn Signal/Multifunction Lever ... 177 Turn and Lane-Change Signals ... 178 Headlamp High/Low-Beam Changer ... 179 Flash-to-Pass ...
Page 172 Section 3 Traction Control System (TCS) Warning Light ... 220 Engine Coolant Temperature Gage ... 221 Malfunction Indicator Lamp ... 222 Fuel Gage ... 225 Message Center ... 225 Passenger Seatbelt Reminder Message ... 226 Service Traction System Warning Message ... 226 Traction Active Message ...
Page 173 NOTES...
Page 174: Instrument Panel Overview
Instrument Panel Overview...
Page 175 The main components of the instrument panel are the following: A. Exterior/Interior Lamps Control. See Exterior Lamps on page 185 and Interior Lamps on page 188. B. Turn Signal/Multifunction Lever. See Turn Signal/Multifunction Lever on page 177. C. Hazard Warning Flasher Button. See Hazard Warning Flashers on page 176.
Page 176: Hazard Warning Flashers
Hazard Warning Flashers The hazard warning ﬂashers warn others. They also let police know you have a problem. Your front and rear turn signal lamps will ﬂash on and off. The hazard warning ﬂasher button is located on top of the steering column.
Page 177: Tilt Wheel
Tilt Wheel A tilt wheel lets you adjust the steering wheel before you drive. You can raise the steering wheel to the highest level to give your legs more room when you enter and exit the vehicle. The lever that lets you tilt the steering wheel is located on the left side of the steering column.
Page 178: Turn And Lane-Change Signals
• PUSH Windshield Washer. See Windshield Washer on page 180. • CRUISE Cruise Control. See Cruise Control on page 181. Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change.
Page 179: Headlamp High/Low-Beam Changer
Headlamp High/Low-Beam Changer To change the headlamps from low to high, push the turn signal lever away from you, then release it. To change the headlamps from high to low, pull the lever toward you. When the high beams are on, this light on the instrument panel cluster and the HUD display, if the vehicle...
Page 180: Windshield Washer
Windshield Washer PUSH: To wash your windshield, press and hold the paddle with the windshield washer symbol. The washers and wipers will operate. When you release the paddle, the washers will stop, and the wipers will continue to operate for two cycles, unless your wipers were already on. In that case, the wipers will resume the wiper speed you selected earlier.
Page 181: Cruise Control
(Rear Wiper/Washer): To wash and wipe the rear window, press the washer symbol on the bottom of the switch. Washer ﬂuid will spray as long as the switch is held in. When the switch is released, the wiper will continue to cycle three more times.
Page 182 The cruise controls are located on the end of the turn signal/ multifunction lever. ON: Move the switch to this position to turn the cruise control system on. R/A: Move the switch to this position to resume a set speed or to accelerate. SET: Press this button, located at the end of the lever, to set a speed.
Page 183 Setting Cruise Control CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control.
Page 184 Increasing Speed While Using Cruise Control There are two ways to increase speed while using cruise control: • Use the accelerator pedal to get to the higher speed. Press the SET button at the end of the lever, then release the button and the accelerator pedal.
Page 185: Exterior Lamps
Using Cruise Control on Hills How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up steep hills, you may have to step on the accelerator pedal to maintain your speed.
Page 186: Lamps On Reminder
(Parking Lamps): Turning the control to this < position turns on the parking lamps together with the following: • Taillamps • Instrument Panel Lights (Headlamps): Turning the control to this position turns on the headlamps together with the previously listed lamps and lights. Lamps on Reminder If the driver’s door is opened and you turn the ignition to OFF while leaving the lamps on, you will...
Page 187: Automatic Headlamp System
Automatic Headlamp System When the exterior lamp control is turned to AUTO, and it is dark enough outside, the headlamps and parking lamps will, automatically, come on. The lamps will also come on automatically if the following conditions are met: •...
Page 188: Interior Lamps
Interior Lamps The interior lamps can be controlled, or automatically turn on or off under certain conditions. They are explained in the following text. Instrument Panel Brightness This feature controls the brightness of the instrument panel lights. The knob for this feature is located on the interior lamps control.
Page 189: Headlamp Exit Delay
Headlamp Exit Delay If your vehicle has headlamp exit delay, it will keep the headlamps and parking lamps on at night for 30 seconds if the following conditions are met: • The ignition is turned to OFF. • The exterior lamp control is in the AUTO position.
Page 190: Delayed Lighting
Delayed Lighting If your vehicle has delayed lighting, it will continue to illuminate the interior for 25 seconds after all doors have been closed. The lamps will continue to illuminate when the following conditions are met: • A door is opened then closed. •...
Page 191: Perimeter Lighting
Perimeter Lighting If your vehicle has perimeter lighting, it will turn on the headlamps and parking lamps for 25 seconds when the following conditions are met: • The ignition is turned to OFF. • The exterior lamp control is in the AUTO position.
Page 192: Cargo Lamp
Cargo Lamp The cargo lamp is located in the rear of the vehicle, above the liftgate opening. It comes on automatically each time you open the doors, if the interior lamp control is in the DOOR position. There are two reading lamps located on the cargo lamp.
Page 193: Head-Up Display (Hud)
Head-Up Display (HUD) CAUTION: If the HUD image is too bright, or too high in your ﬁeld of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your ﬁeld of view.
Page 194 The Head-Up Display also displays a CHECK GAGES message. The following messages could appear on the instrument panel cluster when CHECK GAGES appears: • Engine Coolant Temperature Warning. See Engine Coolant Temperature Warning Message on page 227. • Low Oil Pressure. See Low Oil Pressure Message on page 229.
Page 195 HUD image harder to see. When you ﬁrst start the vehicle the display will show BUICK and the Buick logo for a few seconds. If it is cold outside, this display may stay on for up to a minute.
Page 196: Ultrasonic Rear Parking Assist (Urpa)
To clean the HUD, spray household glass cleaner on a soft, clean cloth. Wipe the HUD lens gently, then dry it. Do not spray cleaner directly on the lens because the cleaner could leak into the unit. If the ignition is on and you cannot see the HUD image, check to see if one of the following conditions exist: •...
Page 197: How The System Works
CAUTION: The Ultrasonic Rear Park Assist (URPA) system does not replace driver vision. URPA does not: • Operate above speeds of 3 mph (5 km/h). • Detect objects more than 5 feet (1.5 meters) behind the vehicle. This distance may be less during warmer or humid weather.
Page 198 If an object is detected at a REVERSE (R) speed of less than 3 mph (5 km/h), one of the following will occur: Description English amber light amber/amber lights 40 in amber/amber/red lights & 20 in continuous chime amber/amber/red lights ﬂashing &...
Page 199: Accessory Power Outlet(S)
Accessory Power Outlet(s) With accessory power outlets you can plug in electrical equipment such as a cellular telephone or CB radio. There is one front power outlet/cigarette lighter located on the ﬂoor console in the cell phone storage compartment. There are also two rear power outlets. One is located in the rear of the ﬂoor console below the vents.
Page 200: Ashtray(S) And Cigarette Lighter
Ashtray(s) and Cigarette Lighter The ashtray is located on the ﬂoor console closest to the instrument panel. Lift the lid to expose the ashtray. To remove the ashtray, lift it up. The cigarette lighter is located on the ﬂoor console in the cell phone storage compartment closest to the driver’s seat.
Page 201 To change the current mode, select one of the following: (Vent): This mode directs air to the instrument panel outlets. (Bi-Level): This mode directs half of the air to the instrument panel outlets, then directs the remaining air to the ﬂoor outlets. Cooler air is directed to the upper outlets and warmer air to the ﬂoor outlets.
Page 202: Defogging And Defrosting
The system is designed to make adjustments to help with fuel economy while still maintaining the selected temperature. On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time it takes for your vehicle to cool down. It also helps the system to operate more efficiently.
Page 203: Rear Window Defogger
Rear Window Defogger The rear window defogger uses a warming grid to remove fog from the rear window. < REAR: Press this button to turn the rear window defogger on or off. An indicator light in the button will come on to let you know that the rear window defogger is activated.
Page 204 To change the current mode, select one of the following: (Vent): This mode directs air to the instrument panel outlets. (Bi-Level): This mode directs half of the air to the instrument panel outlets, then directs the remaining air to the ﬂoor outlets. Cooler air is directed to the upper outlets and warmer air to the ﬂoor outlets.
Page 205 On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time it takes for your vehicle to cool down. It also helps the system to operate more efficiently. The air-conditioning system removes moisture from the air, so you may sometimes notice a small amount of water dripping underneath your vehicle while idling or after turning off the engine.
Page 206: Dual Automatic Climate Control System
Rear Window Defogger The rear window defogger uses a warming grid to remove fog from the rear window. < REAR: Press this button to turn the rear window defogger on or off. An indicator light in the button will come on to let you know that the rear window defogger is activated.
Page 207: Manual Operation
To place the entire system in automatic mode, do the following: 1. Press the driver’s temperature knob to turn the system on. 2. Adjust the temperature to a comfortable setting. Choosing the coldest or warmest temperature will not cause the system to heat or cool any faster.
Page 208 To change the current mode, select one of the following: (Vent): This mode directs air to the instrument panel outlets. (Bi-Level): This mode directs approximately half of the air to the instrument panel outlets, then directs the remaining air to the ﬂoor outlets and the defroster and side window outlets.
Page 209 You may notice a slight change in engine performance when the air-conditioning compressor shuts off and turns on again. This is normal. The system is designed to make adjustments to help with fuel economy while still maintaining the selected temperature. On hot days, open the windows to let hot inside air escape;...
Page 210: Outlet Adjustment
Rear Window Defogger The rear window defogger uses a warming grid to remove fog from the rear window. < REAR: Press this button to turn the rear window defogger on or off. An indicator light in the button will come on to let you know that the rear window defogger is activated.
Page 211: Warning Lights, Gages, And Indicators
Warning Lights, Gages, and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.
Page 212: Instrument Panel Cluster
Instrument Panel Cluster Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, how much fuel you’re using, and many other things you’ll need to drive safely and economically.
Page 213: Speedometer And Odometer
Speedometer and Odometer Your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). However, a Canadian odometer will remain in metric units only.
Page 214: Retro-Active Reset
Retro-Active Reset The trip odometer has a feature called retro-active reset. This feature can be used to set the trip odometer to the number of miles or kilometers driven since the ignition was last turned on. This can be used if you forget to reset your trip odometer at the beginning of a trip.
Page 215: Safety Belt Reminder Light
Safety Belt Reminder Light When the key is turned to ON or START, a chime will come on for several seconds to remind people to fasten their safety belts. The safety belt light will also come on and stay on for several seconds, then it will ﬂash for several more.
Page 216 This light will come on when you start your vehicle, and it will ﬂash for a few seconds. Then the light should go out. This means the system is ready. If the airbag readiness light stays on after you start the vehicle or comes on when you are driving, your airbag system or safety belt pretensioners may not work properly.
Page 217: Passenger Airbag Status Indicator
Passenger Airbag Status Indicator Your vehicle has the passenger sensing system. Your rearview mirror has a passenger airbag status indicator. United States Canada When the ignition key is turned to ON or START, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check.
Page 218 Your vehicle has a rear seat that will accommodate a rear-facing child restraint. A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION: Even though the passenger sensing system is designed to turn off the...
Page 219: Brake System Warning Light
Brake System Warning Light When the ignition is on, the brake system warning light will come on when you set your parking brake. The light will stay on if your parking brake does not release fully. If it stays on after your parking brake is fully released, it means you have a brake problem.
Page 220: Anti-Lock Brake System Warning Light
Anti-Lock Brake System Warning Light United States Your vehicle may have an Anti-Lock Brake System (ABS) warning light. If it does, the light should come on for a few seconds when you turn the ignition key to ON. If the ABS warning light stays on longer than normal after you have started your engine, turn the ignition off.
Page 221: Engine Coolant Temperature Gage
Your vehicle may have a Traction Control System (TCS) warning light. The TCS warning light may come on for the following reasons: • If you turn the TCS off by pressing the TRAC OFF button located in the instrument panel switchbank the TCS warning light will come on and stay on.
Page 222: Malfunction Indicator Lamp
Malfunction Indicator Lamp Service Engine Soon Light in the United States or Check Engine Light in Canada United States Your vehicle has a computer which monitors operation of the fuel, ignition, and emission control systems. This system is called OBD II (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce...
Page 223: If The Light Is Flashing
This light should come on, as a check to show you it is working, when the ignition is on and the engine is not running. If the light does not come on, have it repaired. This light will also come on during a malfunction in one of two ways: •...
Page 224: Emissions Inspection And Maintenance Programs
Did you just drive through a deep puddle of water? If so, your electrical system may be wet. The condition will usually be corrected when the electrical system dries out. A few driving trips should turn the light off. Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel.
Page 225: Message Center
This can happen if you have recently replaced your battery or if your battery has run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving. This may take several days of routine driving. If you have done this and your vehicle still does not pass the inspection for lack of OBD system readiness, your dealer can prepare the vehicle for inspection.
Page 226: Passenger Seatbelt Reminder Message
Passenger Seatbelt Reminder Message If your vehicle has the passenger sensing system, this message reminds the passenger to buckle their seatbelt. This message will come on and a chime will sound when the following conditions exist: • The ignition is ON, •...
Page 227: Traction Active Message
Traction Active Message United States If your vehicle has the Traction Control System (TCS), the TRACTION ACTIVE message will appear when the TCS is limiting wheel spin. You may feel or hear the system working, but this is normal. Slippery road conditions may exist if this message appears, so adjust your driving accordingly.
Page 228: Charging System Indicator Message
Charging System Indicator Message The charging system battery symbol will come on in the message center when you turn on the ignition as a check to show you it is working. It will remain on as long as the engine is not running.
Page 229: Low Oil Pressure Message
Low Oil Pressure Message United States Your vehicle may have a low oil pressure warning message. Your oil pressure message lets you know when you may have a problem with your engine oil pressure. When the engine is running and this message appears, the engine oil level may be too low.
Page 230: Change Engine Oil Message
Change Engine Oil Message United States When this message comes on and stays on after you have started the engine, it means that service is required for your vehicle. See Scheduled Maintenance on page 475 and Engine Oil on page 365 for more information. Door Ajar Warning Message Canada United States...
Page 231: Pass-Key ® Iii Security Message
Check Gas Cap Message If your vehicle has this message, it will come on when the ignition is turned to ON or START and the gas cap is open. ® PASS-Key III Security Message United States If you are ever driving and this message comes on and stays on, you will be able to restart your engine if you turn it off.
Page 232: Low Fuel Warning Message
Low Fuel Warning Message United States If your fuel is low, the warning message will come on and stay on until you add fuel. If the warning message is still on after adding fuel, you need to reset the warning message. To reset the warning message, turn the ignition off and then back on.
Page 233: Service Vehicle Soon Message
Service Vehicle Soon Message United States This light will come on if your vehicle has certain non-emission related problems. For example, if the entire electrical system fails to send and receive messages from the vehicle’s components, this message will come on. These problems may not be obvious and may affect vehicle performance or durability.
Page 234: Remote Keyless Entry Transmitter Battery
Remote Keyless Entry Transmitter Battery Low Warning Message United States If you receive this message, the battery in the remote keyless entry needs to be replaced. See “Battery Replacement” under Remote Keyless Entry System Operation on page 111 for instructions. Parking Lamp Warning Message United States Canada...
Page 235: Driver Information Center (Dic)
Highbeam Out Warning Message United States If this message appears, one or both of the vehicle’s high-beam headlamp bulbs needs replacement. See Bulb Replacement on page 399 for more information. Driver Information Center (DIC) If your vehicle has a Driver Information Center (DIC), the display is located on the instrument panel cluster in the tachometer gage.
Page 236: Dic Controls And Displays
BUICK: BUICK will be displayed for three seconds. DRIVER #: This message will be displayed for another three seconds after BUICK appears in the display. The driver number corresponds to the numbers, 1 or 2, on the back of the Remote Keyless Entry (RKE) transmitters.
Page 237 INST ECONOMY (Instant Economy): Instant fuel economy reﬂects the fuel economy that the vehicle has right now. Instant fuel economy varies with your driving conditions, such as acceleration, braking and the grade of the road being traveled. Unlike average fuel economy, instant fuel economy cannot be reset.
Page 238: Dic Compass
TIRE PRESSURE: The check tire pressure system can alert you to a large change in the pressure of one tire. If the tire pressure is normal, TIRE PRESSURE NORMAL will display. If the tire pressure is low, LOW TIRE PRESSURE will display.
Page 239 ZONE - - PRESS & HOLD SET TO CHANGE: This display mode will appear when you are manually calibrating the system. When the compass is being recalibrated for the ﬁrst time, the zone symbol will be displayed. When the compass is being recalibrated any time after that, the current zone number for compass variance will be displayed in place of the zone symbol.
Page 240: Dic Vehicle Personalization
DIC Vehicle Personalization The DIC is used to program the choices of two drivers. The drivers are recognized as DRIVER 1 or DRIVER 2 in the DIC display. You will let the DIC know which driver you are by using your Remote Keyless Entry (RKE) transmitter.
Page 241 United States 4. The program mode message will appear in the message center as an indication that your vehicle is ready to begin programming. 5. Follow the instructions given by the DIC. Headlamp Exit Delay This feature allows you to customize the headlamps and parking lamps.
Page 242: Interior Lighting Delay
Interior Lighting Delay The interior lighting delay feature can be programmed to one of the following modes: OFF: This feature will not illuminate the interior of your vehicle when all of the doors are closed. ON: This feature will continue to illuminate the interior lamps for 25 seconds after all doors have been closed so that you can ﬁnd the ignition and buckle your safety belt at night.
Page 243: Interior Lighting On
Interior Lighting On The interior lighting on feature can be programmed to one of the following modes: KEY OUT: The interior lamps will come on for about 25 seconds whenever you remove the key from the ignition. DOOR: The interior lamps will come on for about 25 seconds when any door is opened.
Page 244: Auto Door Lock/Unlock
Auto Door Lock/Unlock The doors will automatically lock when the vehicle is shifted out of PARK (P). For automatic unlocking, you can program your vehicle to one of the following modes: OFF: When the shift lever is put in PARK (P), the doors will not unlock automatically.
Page 245 Delayed Locking The delayed locking feature can be programmed to one of the following modes: ON: Lock your vehicle using the power door lock switch or the Remote Keyless Entry (RKE) transmitter while any door is opened, you will hear three chimes and the doors will not lock. Five seconds after the last door is closed, all doors will lock.
Page 246: Remote Door Unlock
Remote Door Unlock The remote door unlock feature can be programmed to one of the following modes: DRIVER/ALL: With the ﬁrst press of UNLOCK on the Remote Keyless Entry (RKE) transmitter, the driver’s door will unlock, and with the second press of UNLOCK, within ﬁve seconds of the ﬁrst press, all passenger’s doors will unlock.
Page 247: Lock Feedback
Your vehicle was originally programmed to LIGHTS. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for “Entering Programming Mode” listed previously. 2. Follow the instructions for programming HEADLMP EXIT DELAY earlier in this section, to make sure which mode it is programmed to.
Page 248: Seat Recall
Your vehicle was originally programmed to LIGHTS and HORN. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for “Entering Programming Mode” listed previously. 2.
Page 249: Tilt Mirror
EXIT: The position recalled will be the previously programmed exit position. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Follow the instructions for “Entering Programming Mode” listed previously. 2.
Page 250: Exiting Programming Mode
Exiting Programming Mode To exit programming mode, do one of the following: • Shift out of PARK (P). • Turn the ignition key out of ON. • Do not program any commands for one minute while in the programming mode. The programming mode message will turn off to let you know that you are no longer in the programming mode.
Page 251 CAUTION: This system provides you with a far greater access to audio stations and song listings. Giving extended attention to entertainment tasks while driving can cause a crash and you or others can be injured or killed. Always keep your eyes on the road and your mind on the drive —...
Page 252: Setting The Time
Setting the Time Press and hold H until the correct hour appears on the display. AM will appear for morning hours. Press and hold M until the correct minute appears on the display. The time can be set with the ignition on or off.
Page 253: Xm™ Satellite Radio Service
With RDS, your radio can do the following: • Seek to stations broadcasting the selected type of programming • Receive announcements concerning local and national emergencies • Display messages from radio stations • Seek to stations with traffic announcements This system relies upon receiving speciﬁc information from these stations and only works when the information is available.
Page 254: Finding A Station
SCV (Speed-Compensated Volume): With SCV, your audio system adjusts automatically to make up for road and wind noise as you drive. To get to SCV, push the TUNE/AUDIO knob repeatedly until SPEED VOL (volume) displays. Turn the TUNE/AUDIO knob to select MIN (minimum), MED (medium), or MAX (maximum).
Page 255: Setting Preset Stations
To scan preset stations, press and hold either SEEK arrow for more than four seconds until PSCAN and the preset number displays. You will hear two beeps. The radio goes to the ﬁrst preset station stored on the pushbuttons, plays for a few seconds, then goes to the next preset station.
Page 256: Adjusting The Speakers (Balance/Fade)
To adjust both tone controls and both speaker controls to the middle position, ﬁrst exit the audio mode by waiting ﬁve seconds without making any changes. Then push and hold the AUDIO knob for more than two seconds until you hear a beep.
Page 257 4. To go to another station within that PTY while the PTY is displayed, press either SEEK arrow once. If the PTY is not displayed, press either SEEK arrow twice to display the PTY and then to go to another station. 5.
Page 258: Rds Messages
RDS Messages ALERT!: Alert warns of local or national emergencies. When an alert announcement comes on the current radio station, ALERT! displays. You will hear the announcement, even if the volume is low or a CD is playing. If a CD is playing, play stops during the announcement.
Page 259: Radio Messages
Radio Messages CAL (CALIBRATE): The audio system has been calibrated for your vehicle from the factory. If CAL appears on the display it means that the radio has not been conﬁgured properly for your vehicle and must be returned to your dealer for service. LOCKED: This message displays when the ®...
Page 260 Do not add any label to a CD, it could get caught in the CD player. If a CD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded CD with a marking pen. Notice: If you add any label to a CD, insert more than one CD into the slot at a time, or attempt to play scratched or damaged CDs, you...
Page 261 DISP (Display): Press this button to see which track is playing. Press it again within ﬁve seconds to see how long it has been playing. To change the default on the display, track or elapsed time, press this button until you see the display you want, then hold the button until the display ﬂashes.
Page 262: Listening To A Dvd
Listening to a DVD Your vehicle may have a Rear Seat Entertainment System (RSE), see Rear Seat Entertainment System on page 277 for more information. If your vehicle has this system and a DVD is playing, the DVD symbol displays indicating that the DVD is available and can be listened to through the vehicles speakers.
Page 263 This system relies upon receiving speciﬁc information from these stations and only works when the information is available. In rare cases, a radio station can broadcast incorrect information that can cause the radio features to work improperly. If this happens, contact the radio station.
Page 264 RCL (Recall): Press this knob to switch the display between the radio station frequency and the time. When the ignition is off, press this knob to display the time. For RDS, press the RCL knob to change what appears on the display while using RDS. The display options are station name, RDS station frequency, PTY, and the name of the program (if available).
Page 265 Setting Preset Stations Up to 30 stations (six FM1, six FM2, and six AM, six XM1 and six XM2 (if equipped)), can be programmed on the six numbered pushbuttons, by performing the following steps: 1. Turn the radio on. 2. Press BAND to select FM1, FM2, AM, or XM1 or XM2.
Page 266 Adjusting the Speakers (Balance/Fade) AUDIO: To adjust the balance between the right and the left speakers, push the AUDIO knob until BAL (balance) displays. Turn the knob to move the sound toward the right or the left speakers. To adjust the fade between the front and rear speakers, push and hold the AUDIO knob until FAD displays.
Page 267: Setting Preset Ptys (Rds Only)
To use the PTY interrupt feature, press and hold the P-TYPE button until a beep sounds on the PTY you want to interrupt with. When selected, an asterisk appears beside that PTY on the display. You can select multiple interrupts if desired. While you are listening to a CD, the last selected RDS station interrupts play if that selected program type format is broadcast.
Page 268 RDS Messages ALERT!: Alert warns of local or national emergencies. When an alert announcement comes on the current radio station, ALERT! displays. You will hear the announcement, even if the volume is low or a CD is playing. If a CD is playing, play stops during the announcement.
Page 269 Radio Messages CAL ERR (Calibration Error): The audio system has been calibrated for your vehicle from the factory. If CAL ERR displays it means that the radio has not been conﬁgured properly for the vehicle and it must be returned to your dealer for service.
Page 270 Do not add any label to a CD, it could get caught in the CD player. If a CD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded CD with a marking pen. Notice: If you add any label to a CD, insert more than one CD into the slot at a time, or attempt to play scratched or damaged CDs,...
Page 271 Playing a Speciﬁc Loaded CD For every CD loaded, a number appears on the display. To play a speciﬁc CD, ﬁrst press the CD AUX button, then press the numbered pushbutton that corresponds to the CD. A small bar displays under the CD number that is playing and the track number also displays.
Page 272 To use repeat, do the following: • To repeat the track you are listening to, press and release the RPT button. RPT displays. Press RPT again to turn off repeat play. • To repeat the CD you are listening to, press and hold the RPT button for two seconds.
Page 273: Using Song List Mode
RCL (Recall): Press this knob to see how long the current track has been playing. To change the default on the display, track and elapsed time, press the knob until you see the desired display, then hold the knob until the display ﬂashes. The selected display now becomes default.
Page 274 To delete tracks from the song list, perform the following steps: 1. Turn the CD player on. 2. Press the SONG LIST button to turn song list on. S-LIST displays. 3. Press the SEEK SCAN arrows to select the desired track to be deleted. 4.
Page 275 CD Messages CHECK CD: If this message appears on the display and/or the CD ejects, it could be for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. • You are driving on a very rough road.
Page 276: Xm Radio Messages
XM Radio Messages Radio Display Message XL (Explicit Language XL on the radio display, Channels) after the channel name, indicates content with explicit language. Updating Updating encryption code The encryption code in the receiver is being updated, and No Signal Loss of signal Loading XM Acquiring channel audio...
Page 277: Navigation/Radio System
Radio Display Message Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0) If tuned to channel 0, this message alternates with the Unknown Radio ID not known (should only be if hardware failure) Chk XMRcvr Hardware failure...
Page 278: Parental Control
Parental Control This button is located behind the video screen, next to the auxiliary jacks, near the driver of the vehicle. Press this button while a DVD or CD is playing to freeze the video and mute the audio. The video screen will display Parental Control On and the power indicator light on the DVD player will ﬂash.
Page 279 To adjust the volume on the wireless headphones, use the volume control. You can listen to the RSE system through the wired headphone jacks on the Rear Seat Audio (RSA) system, if equipped when the following occurs: • The RSA system is on •...
Page 280: Stereo Rca Jacks
Battery Replacement To change the batteries, do the following: 1. Loosen the screw on the battery compartment door located on the left side of the headphone earpiece. 2. Replace the two AAA batteries in the compartment. Make sure that they are installed correctly using the diagram on the inside of the battery compartment.
Page 281: Audio Output
Audio Output Audio from the DVD player or auxiliary devices can be heard through the following possible sources: • Wireless Headphones • Vehicle’s Speakers • Rear Seat Audio (RSA) RCA Jacks, if equipped. Plug the wired headphones, not included into the jacks on the RSA system. Only one audio source can be heard through the vehicle’s speakers at a time.
Page 282: Video Screen
Video Screen The video screen is located in the overhead console. To use the video screen, do the following: 1. Push forward on the release button and the screen will fold down. 2. Push the screen away from you and adjust its position as desired.
Page 283 DVD Player Buttons (Eject): Press this button to eject a DVD or CD. (Power): Press this button to turn the DVD player on and off. SRCE (Source): Press this button to switch the system between the DVD player and an auxiliary source.
Page 284 (Directional Control Circle): Press these buttons to move through menu choices, or to move forward or back in a movie. These controls can be used to move forward or backward through a CD. (Enter): Press this button to select choices highlighted in any menu.
Page 285: Remote Control
Remote Control To use the remote control, aim it at the transmitter window below the video screen and press the desired button. Direct sunlight or very bright light may affect the ability of the transmitter to receive signals from the remote control. If the remote control does not seem to be working, the batteries may need to be replaced.
Page 286 (Directional Arrows): Press these buttons to move through DVD menus. The up arrow will skip to the next chapter or track, the down arrow will take you to the beginning of the current chapter or track. Press the down arrow twice to take you to the previous chapter or track.
Page 287 (Backlight): Press this button to turn the remote control backlighting on. (Main Menu): Press this button to view the media menu. The media menu is different on every disc. Use the up, down, right, and left arrow buttons to move the cursor around the media menu.
Page 288 Setup Menu To access the setup menu, ensure that a DVD is in the player and the video is stopped. Press the main menu button. Once the menu is activated, use the directional arrows and the enter button to navigate the screen. The setup menu allows the user to select default preferences for Menu Language, Subtitle Language, Audio Language, TV Aspect, TV Mode,...
Page 289 Tips and Troubleshooting Chart Problem Recommended Action No power. The ignition may not be in ACCESSORY, ON, START, or RAP. The parental control button might have been pressed. The power indicator light will ﬂash. Disc will not play. The system might be off. The parental control button might have been pressed.
Page 290 Problem Recommended Action I ejected the disc and Eject the disc again. tried to take it out, but it was pulled back into the slot. The language in the audio Press the main menu or on the screen is wrong. button on the DVD player or the remote control and change the audio or...
Page 291 Problem Recommended Action When I return to the DVD If the stop button was from the system menu, pressed once, it resumes sometimes it plays from play from where it left off. the beginning and If the stop button was sometimes from where it pressed twice, it will start left off.
Page 292: Dvd Distortion
Problem Recommended Action The wireless headphones Verify that the have audio distortion. headphones are facing to the front of the vehicle, left and right sides are indicated on the headphones to ensure that the signal is received properly. In auxiliary mode, the Check the signal coming picture moves or scrolls.
Page 293: Cleaning The Video Screen
Cleaning the Video Screen When cleaning the video screen, use only a clean cloth dampened with clean water. Use care when directly touching or cleaning the screen, as damage may result. Rear Seat Audio (RSA) This feature allows rear seat passengers to listen to any of the sources: radio, cassette tapes, or CDs.
Page 294: Rear Seat Audio (Rsa) Controls
Rear Seat Audio (RSA) Controls The following functions are controlled by the RSA system: SEEK : When listening to the radio, press the up or the down arrow to go to the next or the previous station and stay there. This function is inactive if the front seat passengers are listening to the radio.
Page 295 Press BAND to listen to the radio when a cassette tape or a CD is playing. The inactive cassette or CD will remain safely inside the radio for future listening. The BAND button will not access XM™ Satellite Radio service when the front seat passengers are listening to the RSE system through the vehicle’s speakers and the rear seat passengers are using the wired headphones to listen to the RSA...
Page 296: Theft-Deterrent Feature
Theft-Deterrent Feature ® THEFTLOCK is designed to discourage theft of your vehicle’s radio. It works by using a secret code to disable all radio functions whenever battery power is removed and the radio is placed in a different vehicle. This feature requires no user input to be activated.
Page 297: Radio Reception
(Volume): Press the up or down arrow to increase or decrease the volume. SEEK : Press the up or the down arrow to go to the next or to the previous station and stay there. The sound will mute while seeking. The radio will only seek stations with a strong signal that are in the selected band.
Page 298: Care Of Your Cds And Dvds
FM Stereo FM stereo will give the best sound, but FM signals will reach only about 10 to 40 miles (16 to 65 km). Tall buildings or hills can interfere with FM signals, causing the sound to fade in and out. XM™...
Page 299: Fixed Mast Antenna
Fixed Mast Antenna The ﬁxed mast antenna can withstand most car washes without being damaged. If the mast should ever become slightly bent, straighten it out by hand. If the mast is badly bent, replace it. Check occasionally to make sure the mast is still tightened to the fender.
Page 300 NOTES...
Page 301: Driving Your Vehicle
Section 4 Your Driving, the Road, and Your Vehicle ... 302 Defensive Driving ... 302 Drunken Driving ... 303 Control of a Vehicle ... 306 Braking ... 306 Anti-Lock Brake System (ABS) ... 307 Braking in Emergencies ... 309 Traction Control System (TCS) ... 310 Steering ...
Page 302: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and Your Vehicle Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 30. CAUTION: Defensive driving really means “Be ready for anything.”...
Page 303: Drunken Driving
Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It is the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive a vehicle: •...
Page 304 According to the American Medical Association, a 180 lb (82 kg) person who drinks three 12 ounce (355 ml) bottles of beer in an hour will end up with a BAC of about 0.06 percent. The person would reach the same BAC by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had 1-1/2 ounces (45 ml) of liquors like whiskey, gin, or vodka.
Page 305 But the ability to drive is affected well below a BAC of 0.10 percent. Research shows that the driving skills of many people are impaired at a BAC approaching 0.05 percent, and that the effects are worse at night. All drivers are impaired at BAC levels above 0.05 percent.
Page 306: Control Of A Vehicle
Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering, and the accelerator. All three systems have to do their work at the places where the tires meet the road.
Page 307: Anti-Lock Brake System (Abs)
Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is a mistake. The brakes may not have time to cool between hard stops. The brakes will wear out much faster if you do a lot of heavy braking.
Page 308 Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here is what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel.
Page 309: Braking In Emergencies
Remember: ABS does not change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you will not have time to apply your brakes if that vehicle suddenly slows or stops.
Page 310: Traction Control System (Tcs)
Traction Control System (TCS) Your vehicle may have a traction control system that limits wheel spin. This is especially useful in slippery road conditions. The system operates only if it senses that one or both of the front wheels are spinning or beginning to lose traction.
Page 311: Power Steering
To turn the system off, press the TRAC OFF button located on the instrument panel switchbank. If the system is limiting wheel spin when you press the button, the message will go off, but the system will not turn off until there is no longer a current need to limit wheel spin.
Page 312: Steering In Emergencies
Suppose you are steering through a sharp curve. Then you suddenly apply the brakes. Both control systems — steering and braking — have to do their work where the tires meet the road. Unless you have four-wheel anti-lock brakes, adding the hard braking can demand too much of those places.
Page 313: Off-Road Recovery
An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly, and just as quickly straighten the wheel once you have avoided the object.
Page 314: Passing
Passing The driver of a vehicle about to pass another on a two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again. A simple maneuver? Not necessarily! Passing another vehicle on a two-lane highway is a potentially dangerous move, since the passing vehicle occupies the same lane as oncoming traffic for several seconds.
Page 315: Loss Of Control
• When it looks like a chance to pass is coming up, start to accelerate but stay in the right lane and do not get too close. Time your move so you will be increasing speed as the time comes to move into the other lane.
Page 316 Skidding In a skid, a driver can lose control of the vehicle. Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions. But skids are always possible. The three types of skids correspond to your vehicle’s three control systems.
Page 317: Driving At Night
If you have the Anti-Lock Brake System (ABS), remember: It helps avoid only the braking skid. If you do not have ABS, then in a braking skid, where the wheels are no longer rolling, release enough pressure on the brakes to get the wheels rolling again.
Page 318: Driving In Rain And On Wet Roads
You can be temporarily blinded by approaching headlamps. It can take a second or two, or even several seconds, for your eyes to re-adjust to the dark. When you are faced with severe glare, as from a driver who does not lower the high beams, or a vehicle with misaimed headlamps, slow down a little.
Page 319 The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, a heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road, and even people walking. It is wise to keep your wiping equipment in good shape and keep your windshield washer ﬂuid reservoir ﬁlled with washer ﬂuid.
Page 320: Driving Through Deep Standing Water
Driving Through Deep Standing Water Notice: If you drive too quickly through deep puddles or standing water, water can come in through your engine’s air intake and badly damage your engine. Never drive through water that is slightly lower than the underbody of your vehicle.
Page 321: City Driving
City Driving One of the biggest problems with city streets is the amount of traffic on them. You will want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: •...
Page 322: Freeway Driving
Freeway Driving Mile for mile, freeways — also called thruways, parkways, expressways, turnpikes, or superhighways — are the safest of all roads. But they have their own special rules. The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving.
Page 323: Before Leaving On A Long Trip
Once you are moving on the freeway, make certain you allow a reasonable following distance. Expect to move slightly slower at night. When you want to leave the freeway, move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up.
Page 324: Highway Hypnosis
Highway Hypnosis Is there actually such a condition as highway hypnosis? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
Page 325: Hill And Mountain Roads
Hill and Mountain Roads Driving on steep hills or mountains is different from driving in ﬂat or rolling terrain. If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. •...
Page 326 CAUTION: Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all the work of slowing down. They could get so hot that they would not work well. You would then have poor braking or even none going down a hill.
Page 327: Winter Driving
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergency supplies in your vehicle. Also see Tires on page 406. Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth, and a couple of reﬂective warning...
Page 328: Driving On Snow Or Ice
Driving on Snow or Ice Most of the time, those places where the tires meet the road probably have good traction. However, if there is snow or ice between the tires and the road, you can have a very slippery situation.
Page 329: If You Are Caught In A Blizzard
If you do not have TCS, accelerate gently. Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more. Unless you have the Anti-Lock Brake System (ABS), you will want to brake very gently, too.
Page 330 You can run the engine to keep warm, but be careful. CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle.
Page 331: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow
You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with your headlamps. Let the heater run for a while. Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again and repeat this only when you feel really uncomfortable from the cold.
Page 332: Rocking Your Vehicle To Get It Out
Rocking Your Vehicle to Get It Out First, turn the steering wheel left and right. That will clear the area around the front wheels. If your vehicle has traction control, you should turn the traction control system off. See Traction Control System (TCS) on page 310.
Page 333 Tire and Loading Information Label Example Label A vehicle speciﬁc Tire and Loading Information label is attached to the center pillar (B-pillar) of your vehicle. With the driver’s door open, you will ﬁnd the label attached below the door lock post (striker).
Page 334 4. The resulting ﬁgure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs and there will be ﬁve 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 750 (5 x 150) = 650 lbs).
Page 335 Example 2 Item Description Vehicle Capacity Weight for Example 2 Subtract Occupant Weight 150 lbs (68 kg) Available Cargo Weight Total Item 1,000 lbs (453 kg) 750 lbs (340 kg) 250 lbs (113 kg) Refer to your vehicle’s tire and loading information label for speciﬁc information about your vehicle’s capacity weight and seating positions.
Page 336 Certiﬁcation/Tire Label A vehicle speciﬁc Certiﬁcation/Tire label is attached to the rear edge of the driver’s door. The label shows the gross weight capacity of your vehicle. This is called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo.
Page 337: Towing
If you put things inside your vehicle — like suitcases, tools, packages, or anything else, they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going. CAUTION: Things you put inside your vehicle can strike and injure people in a sudden stop...
Page 338: Recreational Vehicle Towing
Recreational Vehicle Towing Recreational vehicle towing means towing your vehicle behind another vehicle – such as behind a motorhome. The two most common types of recreational vehicle towing are known as “dinghy towing” (towing your vehicle with all four wheels on the ground) and “dolly towing”...
Page 339: Dinghy Towing
Dinghy Towing Your vehicle was not designed to be towed with all of its wheels on the ground. It can be towed with two of its wheels on the ground. See “Dolly Towing” following. Dolly Towing To dolly tow your vehicle, do the following: 1.
Page 340: Towing A Trailer
Towing a Trailer CAUTION: If you do not use the correct equipment and drive properly, you can lose control when you pull a trailer. For example, if the trailer is too heavy, the brakes may not work well — or even at all. You and your passengers could be seriously injured.
Page 341: If You Do Decide To Pull A Trailer
If You Do Decide To Pull A Trailer If you do, here are some important points: • There are many different laws, including speed limit restrictions, having to do with trailering. Make sure your rig will be legal, not only where you live but also where you will be driving.
Page 342: Weight Of The Trailer Tongue
You can ask your dealer for our trailering information or advice, or you can write us at: Buick Customer Assistance Center P.O. Box 33136 Detroit, MI 48232-5136 In Canada, write to:...
Page 343 If you are using a weight-carrying or weight distributing hitch, the trailer tongue weight (A) should be 10 percent to 15 percent of the total loaded trailer weight (B). Do not exceed the maximum allowable tongue weight for your vehicle. After you have loaded your trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper.
Page 344 You can expect tongue weight to be at least 10 percent of trailer weight (850 lbs (386 kg)) and because the weight is applied well behind the rear axle, the effect on the rear axle will be greater than just the weight itself, as much as 1.5 times as much.
Page 345: Total Weight On Your Vehicle's Tires
Total Weight on Your Vehicle’s Tires Be sure your vehicle’s tires are inﬂated to the upper limit for cold tires. You will ﬁnd these numbers on the Certiﬁcation/Tire Label at the rear edge of the driver’s door, or see Loading Your Vehicle on page 332.
Page 346: Trailer Brakes
Trailer Brakes If your trailer weighs more than 1,000 lbs (450 kg) loaded, then it needs its own brakes – and they must be adequate. Be sure to read and follow the instructions for the trailer brakes so you will be able to install, adjust and maintain them properly.
Page 347: Following Distance
CAUTION: (Continued) • If exhaust does come into your vehicle through a window in the rear or another opening, drive with your front, main heating or cooling system on and with the fan on any speed. This will bring fresh, outside air into your vehicle.
Page 348: Making Turns
Backing Up Hold the bottom of the steering wheel with one hand. Then, to move the trailer to the left, just move that hand to the left. To move the trailer to the right, move your hand to the right. Always back up slowly and, if possible, have someone guide you.
Page 349: Driving On Grades
Driving On Grades Reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you do not shift down, you might have to use your brakes so much that they would get hot and no longer work well.
Page 350: When You Are Ready To Leave After Parking On A Hill
When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: • Start your engine. • Shift into a gear. • Release the parking brake. 2. Let up on the brake pedal. 3.
Page 351: Service And Appearance Care
Section 5 Service ... 354 Accessories and Modiﬁcations ... 354 California Proposition 65 Warning ... 355 Doing Your Own Service Work ... 355 Adding Equipment to the Outside of Your Vehicle ... 356 Fuel ... 356 Gasoline Octane ... 356 Gasoline Speciﬁcations ...
Page 352 Section 5 Windshield Wiper Blade Replacement ... 404 Tires ... 406 Tire Sidewall Labeling ... 407 Tire Terminology and Deﬁnitions ... 410 Inﬂation - Tire Pressure ... 413 Check Tire Pressure System ... 414 Tire Inspection and Rotation ... 416 When It Is Time for New Tires ...
Page 353 Section 5 Vehicle Identiﬁcation ... 461 Vehicle Identiﬁcation Number (VIN) ... 461 Service Parts Identiﬁcation Label ... 461 Electrical System ... 462 Add-On Electrical Equipment ... 462 Headlamp Wiring ... 462 Windshield Wiper Fuses ... 462 Service and Appearance Care Power Windows and Other Power Options ...
Page 354: Service
Service Your dealer knows your vehicle best and wants you to be happy with it. We hope you will go to your dealer for all your service needs. You will get genuine GM parts and GM-trained and supported service people. We hope you will want to keep your GM vehicle all GM.
Page 355: California Proposition 65 Warning
California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems (including some inside the vehicle), many ﬂuids, and some component wear by-products contain and/or emit these chemicals.
Page 356: Fuel
Adding Equipment to the Outside of Your Vehicle Things you might add to the outside of your vehicle can affect the airﬂow around it. This may cause wind noise and affect windshield washer performance. Check with your dealer before adding equipment to the outside of your vehicle. Fuel Use of the recommended fuel is an important part of the proper maintenance of your vehicle.
Page 357: California Fuel
California Fuel If your vehicle is certiﬁed to meet California Emissions Standards, it is designed to operate on fuels that meet California speciﬁcations. See the underhood emission control label. If this fuel is not available in states adopting California emissions standards, your vehicle will operate satisfactorily on fuels meeting federal speciﬁcations, but emission control system performance may be affected.
Page 358: Fuels In Foreign Countries
Gasolines containing oxygenates, such as ethers and ethanol, and reformulated gasolines may be available in your area. General Motors recommends that you use these gasolines if they comply with the speciﬁcations described earlier. However, E85 (85% ethanol) and other fuels containing more than 10% ethanol must not be used in vehicles that were not designed for those fuels.
Page 359: Filling The Tank
Filling the Tank CAUTION: Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling.
Page 360 CAUTION: If you spill fuel and then something ignites it, you could be badly burned. Fuel can spray out on you if you open the fuel cap too quickly. This spray can happen if your tank is nearly full, and is more likely in hot weather.
Page 361: Filling A Portable Fuel Container
Filling a Portable Fuel Container CAUTION: Never ﬁll a portable fuel container while it is in your vehicle. Static electricity discharge from the container can ignite the gasoline vapor. You can be badly burned and your vehicle damaged if this occurs. To help avoid injury to you and others: •...
Page 362: Checking Things Under The Hood
Checking Things Under the Hood CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and start a ﬁre.
Page 363: Hood Release
Hood Release To open the hood, do the following: 1. Pull the hood release 2. At the front of the vehicle, pull up on the center of the hood, and push the secondary hood release to the right. 3. After you have partially lifted the hood, gas handle with this struts will automatically take over to lift and symbol on it.
Page 364: Engine Compartment Overview
Engine Compartment Overview When you lift the hood, this is what you see:...
Page 365: Engine Oil
A. Underhood Fuse Block. See Underhood Fuse Block on page 466. B. Remote Positive (+) Terminal. See Jump Starting on page 394. C. Windshield Washer Fluid Reservoir. See “Adding Washer Fluid” under Windshield Washer Fluid on page 388. D. Radiator Pressure Cap. See Radiator Pressure Cap on page 378.
Page 366: When To Add Engine Oil
When to Add Engine Oil If the oil is below the cross-hatched area at the tip of the dipstick, you will need to add at least one quart/liter of oil. But you must use the right kind. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Speciﬁcations on page 469.
Page 367: What Kind Of Engine Oil To Use
What Kind of Engine Oil to Use Look for two things: • GM6094M Your vehicle’s engine requires oil meeting GM Standard GM6094M. You should look for and use only an oil that meets GM Standard GM6094M. • SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle.
Page 368: Engine Oil Additives
If you are in an area of extreme cold, where the temperature falls below 20°F ( 29°C), it is recommended that you use either an SAE 5W-30 synthetic oil or an SAE 0W-30 oil. Both will provide easier cold starting and better protection for the engine at extremely low temperatures.
Page 369: How To Reset The Engine Oil Life System
How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change your engine oil and ﬁlter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required.
Page 370: When To Inspect The Engine Air Cleaner/Filter
Engine Air Cleaner/Filter 3.5L V6 Engine shown See Engine Compartment Overview on page 364 for the location of the engine air cleaner/ﬁlter. When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/ﬁlter at the Maintenance II intervals and replace it at the ﬁrst oil change after each 50,000 mile (85 000 km) interval.
Page 371 To inspect or replace the air cleaner/ﬁlter, do the following: 1. Remove the two clamps on the duct. 2. Remove the duct. 3. Unlatch the two hooks on top of the engine air cleaner/ﬁlter housing. 4. Inspect or replace the engine air cleaner/ﬁlter. 5.
Page 372: How To Check Automatic Transaxle Fluid
Automatic Transaxle Fluid When to Check and Change Automatic Transaxle Fluid A good time to check your vehicles automatic transaxle ﬂuid level is when the engine oil is changed. Change the ﬂuid and ﬁlter at the intervals listed in Additional Required Services on page 478, and be sure to use the transaxle ﬂuid listed in Recommended Fluids and Lubricants on page 485.
Page 373 Checking the Fluid Level To prepare your vehicle, do the following: 1. Park your vehicle on a level place and keep the engine running. 2. With the parking brake applied, place the shift lever in PARK (P). 3. With your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range.
Page 374: How To Add Automatic Transaxle Fluid
How to Add Automatic Transaxle Fluid Refer to the Maintenance Schedule to determine what kind of transaxle ﬂuid to use. See Recommended Fluids and Lubricants on page 485. If the ﬂuid level is low, add only enough of the proper ﬂuid to bring the level into the cross-hatched area on the dipstick.
Page 375: Engine Coolant
Engine Coolant The cooling system in your vehicle is ﬁlled with ® DEX-COOL engine coolant. This coolant is designed to remain in your vehicle for 5 years or 150,000 miles (240 000 km), whichever occurs ﬁrst, if you add only DEX-COOL life coolant.
Page 376: What Coolant To Use
What Coolant to Use Use a mixture of one-half clean, drinkable water ® and one-half DEX-COOL coolant which will not damage aluminum parts. If you use this coolant mixture, you do not need to add anything else. CAUTION: Adding only plain water to your cooling system can be dangerous.
Page 377: Checking Coolant
Checking Coolant The coolant recovery tank is located on the driver’s side of the vehicle, above the engine air cleaner/ﬁlter. See Engine Compartment Overview on page 364 for more information on location. The vehicle must be on a level surface. When your engine is cold, the coolant level should be at the full cold mark, or a little higher.
Page 378: Radiator Pressure Cap
Radiator Pressure Cap Notice: The radiator cap on your vehicle is a pressure-type cap and must be tightly installed to prevent coolant loss and possible engine damage from overheating. Be sure the arrows on the cap line up with the overﬂow tube on the radiator ﬁller neck.
Page 379: If No Steam Is Coming From Your Engine
Notice: If your engine catches ﬁre because you keep driving with no coolant, your vehicle can be badly damaged. The costly repairs would not be covered by your warranty. See Overheated Engine Protection Operating Mode on page 380 for information on driving to a safe place in an emergency.
Page 380: Overheated Engine Protection Operating Mode
If the warning continues, pull over, stop, and park your vehicle right away. If there is still no sign of steam, idle the engine for three minutes while you are parked. If vehicle still has the warning, turn off the engine and get everyone out of the vehicle until it cools down.
Page 381: Cooling System
Cooling System When you decide it is safe to lift the hood, this is what you see: A. Radiator Pressure Cap B. Electric Engine Cooling Fans C. Engine Coolant Recovery Tank CAUTION: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you.
Page 382 The coolant level should be at or above the full cold mark. If it is not, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump, or somewhere else in the cooling system.
Page 383 How to Add Coolant to the Coolant Recovery Tank If you have not found a problem yet, but the coolant level is not at or above the full cold mark, add a 50/50 mixture of clean, drinkable water ® and DEX-COOL engine coolant at the coolant recovery tank.
Page 384: How To Add Coolant To The Radiator
If the overheat warning continues, there is one more thing you can try. You can add the proper coolant mixture directly to the radiator, but be sure the cooling system is cool before you do it. CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn you badly.
Page 385 If you hear a hiss, wait for that to stop. A hiss means there is still some pressure left. 2. Then keep turning the pressure cap, but now push down as you turn it. Remove the pressure cap. CAUTION: You can be burned if you spill coolant on hot engine parts.
Page 386 Filling in the Radiator Filler Neck 4. Fill the radiator with the proper DEX-COOL coolant mixture, up to the base of the ﬁller neck. See Engine Coolant on page 375 for more information about the proper coolant mixture. If you see a stream of coolant coming from an air bleed valve, close the valve.
Page 387: When To Check Power Steering Fluid
8. Then replace the pressure cap. At any time during this procedure if coolant begins to ﬂow out of the ﬁller neck, reinstall the pressure cap. Be sure the arrows on the pressure cap line up properly. Filling in the Coolant Recovery Tank 9.
Page 388: How To Check Power Steering Fluid
How to Check Power Steering Fluid To check the power steering ﬂuid, do the following: 1. Turn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the reservoir clean. 3. Unscrew the cap and wipe the dipstick with a clean rag.
Page 389: Brake Fluid
Notice: • When using concentrated washer ﬂuid, follow the manufacturer’s instructions for adding water. • Do not mix water with ready-to-use washer ﬂuid. Water can cause the solution to freeze and damage your washer ﬂuid tank and other parts of the washer system. Also, water does not clean as well as washer ﬂuid.
Page 390 So, it is not a good idea to top off your brake ﬂuid. Adding brake ﬂuid will not correct a leak. If you add ﬂuid when your linings are worn, then you will have too much ﬂuid when you get new brake linings. You should add or remove brake ﬂuid, as necessary, only when work is done on the brake hydraulic system.
Page 391: Brake Wear
Notice: • Using the wrong ﬂuid can badly damage brake system parts. For example, just a few drops of mineral-based oil, such as engine oil, in the brake system can damage brake system parts so badly that they will have to be replaced. Do not let someone put in the wrong kind of ﬂuid.
Page 392: Replacing Brake System Parts
Properly torqued wheel nuts are necessary to help prevent brake pulsation. When tires are rotated, inspect brake pads for wear and evenly tighten wheel nuts in the proper sequence to GM torque speciﬁcations. Brake linings should always be replaced as complete axle sets.
Page 393: Battery
Battery Your vehicle has a maintenance free battery. When it is time for a new battery, get one that has the replacement number shown on the original battery’s label. We recommend an ACDelco replacement battery. See Engine Compartment Overview on page 364 for battery location. Warning: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California...
Page 394: Jump Starting
Jump Starting If your vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. CAUTION: Batteries can hurt you. They can be dangerous because: •...
Page 395 Notice: If you leave your radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by your warranty. Always turn off your radio and other accessories when jump starting your vehicle. 3.
Page 396 CAUTION: Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a ﬂashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle.
Page 397 Notice: If you connect a negative cable to the engine control module (ECM), ECM mounting bracket or any cables that attach to the ECM bracket, you may damage the ECM. Attach the negative cable to a heavy, unpainted metal engine part, other than the ECM, ECM bracket or cables attached to the ECM bracket.
Page 398 Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by your warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.
Page 399: Bulb Replacement
Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 404. For any bulb changing procedure not listed in this section, contact your dealer. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
Page 400 5. Disconnect the electrical connector by pulling back on the locking tab, located on the electrical connector, to separate the two connectors. 6. Turn the bulb socket 7. Pull the bulb assembly out from the lamp housing. one-quarter of a turn clockwise.
Page 401: Taillamps, Turn Signal, And Stoplamps
11. Align the retaining clips on the back of the headlamp with the rectangular holes in the mounting panel. 12. Push ﬁrmly on both ends of the headlamp to snap it into position. 13. Push the retaining clip down to its original position.
Page 402: Taillamps And Back-Up Lamps
4. Turn the bulb socket one-quarter of a turn counterclockwise. 5. Pull the bulb assembly out from the lamp housing. 6. Unhook the electrical connector by lifting up the tabs and separate the connector from the bulb base. 7. Install the new bulb into the electrical connector.
Page 403 A. Outboard Taillamp B. Center Taillamp C. Inboard Back-Up Lamp 6. Turn the bulb socket counterclockwise one-quarter of a turn. 7. Pull the bulb assembly out from the lamp housing. 8. Pull the bulb out of the base. 9. Install the new bulb into the electrical connector.
Page 404: Windshield Replacement
Replacement Bulbs Exterior Lamp Front Turn Signal/Parking Lamp Headlamps High-beam Low-beam Liftgate-Mounted Back-up Lamp Taillamp Rear Outboard Stoplamp/Taillamp/Turn Signal Lamp Sidemarker Lamp For replacement bulbs not listed here, contact your dealer. Windshield Replacement Keep in mind that your windshield is part of the Bulb Number Head-Up Display (HUD) system.
Page 405 To replace the windshield wiper blade assembly do the following: 1. Lift the wiper arm away from the windshield. 2. Push the release lever (B) to disengage the hook and push the wiper arm (A) out of the blade (C). 3.
Page 406: Tires
Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your GM Warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your vehicle.
Page 407: Tire Sidewall Labeling
Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples below show a typical passenger vehicle tire and a compact spare tire sidewall. Passenger (P-Metric) Tire Example (A) Tire Size: The tire size is a combination of letters and numbers used to deﬁne a particular tire’s width, height, aspect ratio, construction type, and service description.
Page 408 (E) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (F) Uniform Tire Quality Grading (UTQG): Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction, and temperature resistance.
Page 409 (B) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (C) Tire Identiﬁcation Number (TIN): The letters and numbers following the DOT (Department of Transportation) code is the Tire Identiﬁcation Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured.
Page 410: Tire Terminology And Deﬁnitions
(B) Tire Width: The three-digit number indicates the tire section width in millimeters from sidewall to sidewall. (C) Aspect Ratio: A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is 60, as shown in item C of the illustration, it would mean that the tire’s sidewall is 60 percent as high as it is wide.
Page 411 Cold Tire Pressure: The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat from driving. See Inﬂation - Tire Pressure on page 413. Curb Weight: This means the weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil, and coolant, but without passengers and cargo.
Page 412 Occupant Distribution: Designated seating positions. Outward Facing Sidewall: The side of an asymmetrical tire that has a particular side that faces outward when mounted on a vehicle. The side of the tire that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/ or model name molding that is higher or deeper than the same moldings on the other sidewall of the tire.
Page 413: Inﬂation - Tire Pressure
Vehicle Maximum Load on the Tire: Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight. Vehicle Placard: A label permanently attached to a vehicle showing the vehicle’s capacity weight and the original equipment tire size and recommended inﬂation pressure.
Page 414: When To Check
When to Check Check your tires once a month or more. Do not forget to check the compact spare tire, it should be at 60 psi (420 kPa). For additional information regarding the compact spare tire, see Compact Spare Tire on page 450. How to Check Use a good quality pocket-type gage to check tire pressure.
Page 415 • The vehicle is moving faster than 70 mph (113 km/h) • The system is not yet calibrated • The tire treadwear is uneven • The compact spare tire is installed • Tire chains are being used • The vehicle is being driven on a rough or frozen road If the anti-lock brake system warning light comes on, the check tire pressure system may not be...
Page 416: Tire Inspection And Rotation
To reset the system, do the following: 1. With the engine off, turn the ignition to ON. 2. Press the MODE button until the DIC reads LOW TIRE PRESSURE HOLD SET TO RESET. 3. Press and hold the SET button until you hear a chime, and TIRE PRESSURE RESET is displayed.
Page 417 When rotating your tires, always use the correct rotation pattern shown here. Do not include the compact spare tire in your tire rotation. After the tires have been rotated, adjust the front and rear inﬂation pressures as shown on the Tire and Loading Information label.
Page 418: When It Is Time For New Tires
When It Is Time for New Tires One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. You need a new tire if any of the following statements are true: •...
Page 419 If the tires have an all-season tread design, the TPC spec number will be followed by an MS for mud and snow. See Tire Sidewall Labeling on page 407 for additional information. CAUTION: Mixing tires could cause you to lose control while driving.
Page 420: Different Size Tires And Wheels
Different Size Tires and Wheels If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, including its braking, ride and handling characteristics, stability, and resistance to rollover. Additionally, if your vehicle has electronic systems such as, anti-lock brakes, traction control, and electronic stability control, the performance of these systems...
Page 421 While the tires available on General Motors passenger cars and light trucks may vary with respect to these grades, they must also conform to federal safety requirements and additional General Motors Tire Performance Criteria (TPC) standards. Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speciﬁed government test course.
Page 422: Wheel Alignment And Tire Balance
Wheel Alignment and Tire Balance The tires and wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis. However, if you notice unusual tire wear or your vehicle pulling to one side or the other, the alignment may need to be checked.
Page 423: Used Replacement Wheels
If you need to replace any of your wheels, wheel bolts, or wheel nuts, replace them only with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts, and wheel nuts for your vehicle. CAUTION: Using the wrong replacement wheels, wheel bolts, or wheel nuts on your vehicle...
Page 424: Tire Chains
Tire Chains CAUTION: Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could cause you to lose control of your vehicle and you or others may be injured in a crash.
Page 425: Accessory Inﬂator
Accessory Inﬂator Your vehicle may have an accessory inﬂator. With it, you can inﬂate things like air mattresses and basketballs, and you can also use it to bring your tires up to the proper pressure. The accessory inﬂator is located in the rear compartment on the driver’s side.
Page 426 4. Remove the protective cap covering the outlet. 5. Attach the other end of the hose to the outlet. 6. Press the accessory inﬂator switch. The light in the switch will come on to show the system is working. If the accessory inﬂator system does not turn on or the light does not come on, the fuse may be blown or installed incorrectly.
Page 427: If A Tire Goes Flat
If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is much more likely to leak out slowly. But if you should ever have a blowout, here are a few tips about what to expect and what to do: If a front tire fails, the ﬂat tire will create a drag that...
Page 428: Changing A Flat Tire
Changing a Flat Tire If a tire goes ﬂat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your vehicle’s hazard warning ﬂashers. See Hazard Warning Flashers on page 176 for more information. CAUTION: Changing a tire can be dangerous.
Page 429: Removing The Spare Tire And Tools
When your vehicle has a ﬂat tire, use the following example as a guide to assist you in the placement of wheel blocks. The following information will tell you next how to use the jack and change a tire. Removing the Spare Tire and Tools The equipment you will need is located in the storage compartment on the passenger’s side, at the rear of the vehicle.
Page 430 A. Jack D. Folding Wrench B. Wing Bolt E. Wing Nut C. Jacking F. J-Hook Instructions 2. Remove the jack and jacking tools by turning the wing bolt counterclockwise. Lift up slightly on the jack to remove it from the bracket. Then take it out of the storage compartment.
Page 431 A. Hoist Shaft D. Retainer B. Folding Wrench E. Compact Spare Tire C. Hoist Assembly 1. Flip the rear cargo area carpet cut out to expose the hoist shaft. 2. Attach the folding wrench into the hoist shaft. 3. Turn the folding wrench counterclockwise to lower the spare tire to the ground.
Page 432 If the spare tire will not lower, the secondary latch may be engaged causing the tire not to lower. Do the following to check the cable: 1. Check under the vehicle to see if the cable is visible. 2. If it is not visible, see Secondary Latch System on page 441.
Page 433 A. Rear Convenience D. Hoist Shaft Center E. Compact Spare Tire B. Folding Wrench F. Retainer C. Storage G. Hoist Shaft Compartment Assembly Cap Hole 1. Open the storage compartment door of the convenience center that is nearest the liftgate and remove the cap on the bottom of the storage compartment.
Page 434 5. Tilt the retainer and slip it through the wheel opening to remove the spare tire from the cable. 6. Turn the wrench clockwise to raise the cable back up after removing the spare tire. Do not store a full-size or a ﬂat road tire under the vehicle.
Page 435 Do the following to check the cable: 1. Check under the vehicle to see if the cable is visible. 2. If it is not visible, see Secondary Latch System on page 441. If it is visible, ﬁrst try to tighten the cable by turning the folding wrench clockwise until you hear two clicks or feel it skip twice.
Page 436: Removing The Flat Tire And Installing The Spare Tire
Removing the Flat Tire and Installing the Spare Tire 1. If there is a wheel cover, loosen the plastic nut caps with the wheel wrench. They will not come off. Then, using the ﬂat end of the wheel wrench, pry along the edge of the cover until it comes off.
Page 437 3. Locate the notch Notice: If you use a jack to raise the vehicle without positioning it correctly, you could damage your vehicle. When raising your vehicle on a jack, avoid contact with the rear axle control arms. Do not raise the vehicle yet. Put the compact spare tire near you.
Page 438 CAUTION: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to ﬁt the jack lift head into the proper location before raising the vehicle.
Page 439 CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from the places where the wheel attaches to the vehicle.
Page 440 8. Lower the vehicle by attaching the folding wrench to the jack and turning the wrench counterclockwise. Lower the jack completely. CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead to an accident.
Page 441: Secondary Latch System
9. Tighten the wheel Notice: Wheel covers will not ﬁt on your compact spare. If you try to put a wheel cover on the compact spare, you could damage the cover or the spare. 10. Do not try to put a wheel cover on the compact spare tire.
Page 442 To release the spare tire from the secondary latch, do the following: CAUTION: Someone standing too close during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is behind you or on either side of you as you pull the jack out from the spare.
Page 443 6. Keep raising the jack until the spare tire stops moving upward and is held ﬁrmly in place. This lets you know that the secondary latch has released and the spare tire is balancing on the jack. 7. Lower the jack by turning the folding wrench counterclockwise.
Page 444: Storing A Flat Or Spare Tire And Tools
9. Tilt the retainer and slip it through the wheel opening when the spare tire has been completely lowered. 10. Turn the folding wrench clockwise to raise the cable back up if the cable is hanging. Have the hoist assembly inspected as soon as you can.
Page 445 For vehicles with aluminum wheels, remove the center cap by tapping the back of the cap with the folding wrench. 3. Remove the J-hook and the wing nut from the back of the jack access door. Assemble the wing nut and the J-hook. 4.
Page 446 3. Lay the tire on top of the center storage compartment with the valve stem down. Make sure you can see the D-ring through the center hole of the tire. 4. Remove the J-hook and the wing nut from the back of the jack access door.
Page 447 3. Flip the D-ring so it is pointing outward. 4. Open the convenience center cover. 5. Stand the full-size tire up, in the tray against the back of the seat with the valve stem pointing out. 6. Remove the J-hook and the wing nut from the back of the jack access door.
Page 448: Storing The Spare Tire And Tools
3. Remove the J-hook and the wing nut from the back of the jack access door. Assemble the wing nut and the J-hook. 4. Install the wing nut and the J-hook to the D-ring through the center hole of the tire. 5.
Page 449 CAUTION: The underbody-mounted spare tire needs to be stored with the valve stem pointing down. If the spare tire is stored with the valve stem pointing upwards, its secondary latch will not work properly and the spare tire could loosen and suddenly fall from your vehicle.
Page 450: Compact Spare Tire
9. Make sure the tire is stored securely. Push, pull (A), and then try to turn (B) the tire. If the tire moves, use the folding wrench to tighten the cable. 10. Put back all tools as they were stored in the jack storage compartment and put the compartment cover back on.
Page 451: Appearance Care
Notice: When the compact spare is installed, do not take your vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails. That can damage the tire and wheel, and maybe other parts of your vehicle.
Page 452 Remove any accidental over-spray from other surfaces immediately. To prevent over-spray, apply cleaner directly to the cleaning cloth. Notice: If you use abrasive cleaners when cleaning glass surfaces on your vehicle, you could scratch the glass and/or cause damage to the integrated radio antenna and the rear window defogger.
Page 453: Fabric/Carpet
Fabric/Carpet Use a vacuum cleaner with a soft brush attachment frequently to remove dust and loose dirt. A canister vacuum with a beater bar in the nozzle may only be used on ﬂoor carpet and carpeted ﬂoor mats. For soils, always try to remove them ﬁrst with plain water or club soda.
Page 454: Instrument Panel, Vinyl, And Other Plastic Surfaces
Leather A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is necessary, a soft cloth dampened with a mild soap solution can be used. Allow the leather to dry naturally. Do not use heat to dry. Never use steam to clean leather.
Page 455: Care Of Safety Belts
Care of Safety Belts Keep belts clean and dry. CAUTION: Do not bleach or dye safety belts. If you do, it may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Page 456: Cleaning Exterior Lamps/Lenses
Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water, a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under Washing Your Vehicle on page 455. Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint ﬁnish.
Page 457: Windshield, Backglass, And Wiper Blades
Windshield, Backglass, and Wiper Blades If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, wax, sap or other material may be on the blade or windshield. Clean the outside of the windshield with a full-strength glass cleaning liquid.
Page 458: Tires
Notice: Using chrome polish on aluminum wheels could damage the wheels. The repairs would not be covered by your warranty. Use chrome polish on chrome wheels only. Use chrome polish only on chrome-plated wheels, but avoid any painted surface of the wheel, and buff off immediately after application.
Page 459: Finish Damage
Finish Damage Any stone chips, fractures or deep scratches in the ﬁnish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense. Minor chips and scratches can be repaired with touch-up materials available from your dealer. Larger areas of ﬁnish damage can be corrected in your dealer’s body and paint shop.
Page 460: Vehicle Care/Appearance Materials
Vehicle Care/Appearance Materials Description Polishing Cloth Interior and exterior Wax-Treated polishing cloth. Tar and Road Oil Removes tar, road oil, Remover and asphalt. Chrome Cleaner Use on chrome or and Polish stainless steel. White Sidewall Removes soil and black Tire Cleaner marks from whitewalls.
Page 461: Vehicle Identiﬁcation
Vehicle Identiﬁcation Vehicle Identiﬁcation Number (VIN) This is the legal identiﬁer for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side. You can see it if you look through the windshield from outside your vehicle.
Page 462: Electrical System
Electrical System Add-On Electrical Equipment Notice: Do not add anything electrical to your vehicle unless you check with your dealer ﬁrst. Some electrical equipment can damage your vehicle and the damage would not be covered by your warranty. Some add-on electrical equipment can keep other components from working as they should.
Page 463: Fuses And Circuit Breakers
Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers, and fusible thermal links. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating.
Page 464 Fuse Empty Steering Wheel Radio Controls Power Door Locks Empty Empty Empty Empty Empty Usage Fuse Usage Empty Turn Signal and Hazard Lamp Flashers Power Seats Electronic Level Control (ELC) Compressor Liftgate and Endgate Rear Auxiliary Power Outlet Electronic Level Control (ELC) Compressor Relay and Height Sensor Heated Mirrors...
Page 465 Fuse Usage HVAC Mode and Temperature Motors and Head-Up Display Accessory Power Windshield Wipers and Washer Instrument Panel Cluster, Body Control Module (BCM), ® PASS-Key Park Lock Ignition Key Solenoid Rear Window Wiper/Washer Power Sunroof Power Windows Map Lamps, Courtesy Lamps and Instrument Panel Lights Radio UQ3 Radio Ampliﬁer...
Page 466: Underhood Fuse Block
Underhood Fuse Block This fuse block is located in the engine compartment, on the passenger’s side of the vehicle. See Engine Compartment Overview on page 364 for more information on location. The back-up lamp relay (A) is located behind and to the left of the underhood fuse block.
Page 467 Fuse Usage Powertrain Relay Powertrain Sensors Transmission Control Module (TCM) Anti-lock Brake System (ABS) Solenoids Valves Oxygen Sensor/MAF Sensor Fuel Injectors (Even) Fuel Injectors (Odd) Daytime Running Lamps (DRL) Passenger’s Low-Beam Headlamp Transmission Driver’s Low-Beam Headlamp Driver’s High-Beam Headlamp Ignition Switch Battery Power Parking Lamps Fuse Usage...
Page 468 Fuse Engine Cooling Fan 1 Main Battery Fuse for Retained Accessory Power Relay and Accessory Relay Main Battery Fuse for Heated Seats, Air Conditioning, Defogger Main Battery Fuse for Power Outlets, Level Control, Power Seats, Mirrors, and Body Computer Main Battery Fuse for Climate Control Blower and Ignition 3 Relay Main Battery Fuse for Ignition Switch, Radio, Heads-Up Display...
Page 469: Capacities And Speciﬁcations
Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 485 for more information. Application Air Conditioning Refrigerant R134a Automatic Transaxle (Pan Removal and Replacement) Cooling System Engine Oil with Filter Fuel Capacity Wheel Nut Torque Engine...
Page 470 NOTES...
Page 471: Maintenance Schedule
Section 6 Maintenance Schedule ... 472 Introduction ... 472 Maintenance Requirements ... 472 Your Vehicle and the Environment ... 473 Using the Maintenance Schedule ... 473 Scheduled Maintenance ... 475 Additional Required Services ... 478 Maintenance Footnotes ... 479 Maintenance Schedule Owner Checks and Services ...
Page 472: Maintenance Schedule
Maintenance Schedule Introduction Important: Keep engine oil at the proper level and change as recommended. Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet or your dealer for details. Maintenance Requirements Notice: Maintenance intervals, checks, inspections, replacement parts, and...
Page 473: Your Vehicle And The Environment
Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment. All recommended maintenance is important. Improper vehicle maintenance can even affect the quality of the air we breathe.
Page 474 This schedule is for vehicles that: • carry passengers and cargo within recommended limits. You will ﬁnd these limits on the Tire and Loading Information label. See Loading Your Vehicle on page 332. • are driven on reasonable road surfaces within legal driving limits.
Page 475: Scheduled Maintenance
If you want to purchase service information, see Service Publications Ordering Information on page 510. Owner Checks and Services on page 480 tells you what should be checked, when to check it, and what you can easily do to help keep your vehicle in good condition.
Page 476 If the engine oil life system is ever reset accidentally, you must service your vehicle within 3,000 miles (5 000 km) since your last service. Remember to reset the oil life system whenever the oil is changed. See Engine Oil Life System on page 368 for information on the Engine Oil Life System and resetting the system.
Page 477 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and ﬁlter. See Engine Oil on page 365. Reset oil life system. See Engine Oil Life System on page 368. An Emission Control Service. Visually check for any leaks or damage. See footnote (j). Inspect engine air cleaner ﬁlter.
Page 478: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components.
Page 479: Maintenance Footnotes
Maintenance Footnotes (a) Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chaﬁng, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc. Check parking brake adjustment. (b) Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear.
Page 480: Owner Checks And Services
(h) Change automatic transaxle ﬂuid and ﬁlter if the vehicle is mainly driven under one or more of these conditions: − In heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher. − In hilly or mountainous terrain. −...
Page 481: At Each Fuel Fill
At Each Fuel Fill It is important to perform these underhood checks at each fuel ﬁll. Engine Oil Level Check Check the engine oil level and add the proper oil if necessary. See Engine Oil on page 365 for further details. Notice: It is important to check your oil regularly and keep it at the proper level.
Page 482: At Least Once A Year
At Least Once a Year Starter Switch Check CAUTION: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. 2.
Page 483 Automatic Transaxle Shift Lock Control System Check CAUTION: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. It should be parked on a level surface.
Page 484 Parking Brake and Automatic Transaxle Park (P) Mechanism Check CAUTION: When you are doing this check, your vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of your vehicle in case it begins to roll.
Page 485: Recommended Fluids And Lubricants
Recommended Fluids and Lubricants Fluids and lubricants identiﬁed below by name, part number, or speciﬁcation may be obtained from your dealer. Usage Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certiﬁed for Gasoline Engines Engine Oil starburst symbol.
Page 486: Normal Maintenance Replacement Parts
Normal Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your GM dealer. Part Engine Air Cleaner/Filter Engine Oil Filter Passenger Compartment Air Filter Kit Spark Plugs Windshield Wiper Blades (Hook Type) Driver’s Side –...
Page 487: Engine Drive Belt Routing
Engine Drive Belt Routing 3.5L V6 Engine...
Page 488: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 472. Any additional information from Owner Checks and Services on page 480 can be added on the following record pages.
Page 489 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 490 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 491: Customer Assistance Information
Section 7 Customer Assistance and Information ... 492 Customer Satisfaction Procedure ... 492 Online Owner Center ... 495 Customer Assistance for Text Telephone (TTY) Users ... 496 Customer Assistance Offices ... 496 GM Mobility Reimbursement Program ... 497 Roadside Assistance Program ... 498 Courtesy Transportation ...
Page 492: Customer Assistance And Information
Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Buick. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your GM dealer’s sales or service departments.
Page 493 STEP THREE — U.S. Owners: Both General Motors and your dealer are committed to making sure you are completely satisﬁed with your new vehicle. However, in the United States, if you continue to remain unsatisﬁed after following the procedure outlined in Steps One and Two, you should ﬁle with the BBB Auto Line Program to enforce your rights.
Page 494 STEP THREE — Canadian Owner: In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps one and two, General Motors of Canada Limited wants you to be aware of its participation in a no-charge Mediation/Arbitration program.
Page 495: Online Owner Center
Online Owner Center Online Owner Center (United States only) The Owner Center is a resource for your GM ownership needs. Speciﬁc vehicle information can be found in one place. The Online Owner Center allows you to: • Get e-mail service reminders. •...
Page 496: Customer Assistance For Text
1-800-263-3830. Customer Assistance Offices Buick encourages customers to call the toll-free number for assistance. However, if a customer wishes to write or e-mail Buick, the letter should be addressed to: United States — Customer Assistance Buick Customer Assistance Center P.O.
Page 497: Overseas - Customer Assistance
Overseas — Customer Assistance Please contact the local General Motors Business Unit. Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma # 2740 Col.
Page 498: Roadside Assistance Program
In the U.S. call 1-800-252-1112. In Canada call 1-800-268-6800. Service available 24 hours a day, 365 days a year. As the proud owner of a new Buick vehicle, you are automatically enrolled in the Roadside Assistance program. This value-added service is intended to provide you with peace of mind as you drive in the city or travel the open road.
Page 499 • Emergency Tow From a Public Roadway or Highway: Tow to the nearest dealership for warranty service or in the event of a vehicle-disabling accident. Winch-out assistance when the vehicle is mired in sand, mud, or snow. • Flat Tire Change: Installation of your spare tire in good condition will be covered at no charge.
Page 500 While we hope you never have the occasion to use our service, it is added security while traveling for you and your family. Remember, we are only a phone call away. U.S. customers call Buick Roadside Assistance: 1-800-252-1112, TTY users, call 1-888-889-2438, Canadian customers call 1-800-268-6800.
Page 501: Courtesy Transportation
Towing and Road Service Exclusions Speciﬁcally excluded from Roadside Assistance coverage are towing or services for vehicles operated on a non-public roadway or highway, ﬁnes, impound towing caused by a violation of local, Municipal, State, Provincial, or Federal law, and mounting, dismounting or changing of snow tires, chains, or other traction devices.
Page 502: Transportation Options
Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to wait, GM helps to minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: Shuttle Service Shuttle service is the preferred means of offering Courtesy Transportation and participating...
Page 503: Additional Program Information
Additional Program Information All program options, such as shuttle service, may not be available at every dealer. Please contact your dealer for speciﬁc information about availability. All Courtesy Transportation arrangements will be administered by appropriate dealer personnel. General Motors reserves the right to unilaterally modify, change or discontinue Courtesy Transportation at any time and to resolve all questions of claim eligibility pursuant to the terms...
Page 504: Collision Damage Repair
To read this information, special equipment is needed and access to the vehicle or the device that stores the data is required. GM will not access information about a crash event or share it with others other than: • with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee, •...
Page 505: Collision Parts
Collision Parts Genuine GM Collision parts are new parts made with the same materials and construction methods as the parts with which your vehicle was originally built. Genuine GM Collision parts are your best choice to assure that your vehicle’s designed appearance, durability, and safety are preserved.
Page 506: Insuring Your Vehicle
Insuring Your Vehicle Protect your investment in your GM vehicle with comprehensive and collision insurance coverage. There are signiﬁcant differences in the quality of coverage afforded by various insurance policy terms. Many insurance policies provide reduced protection to your GM vehicle by limiting compensation for damage repairs by using aftermarket collision parts.
Page 507 • If your vehicle cannot be driven, know where the towing service will be taking it. Get a card from the tow truck operator or write down the driver’s name, the service’s name, and the phone number. • Remove any valuables from your vehicle before it is towed away.
Page 508: Managing The Vehicle Damage Repair Process
Managing the Vehicle Damage Repair Process In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there.
Page 509: Reporting Safety Defects To The Canadian Government
In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you will notify us. Please call us at 1-800-521-7300, or write: Buick Customer Assistance Center P.O. Box 33136 Detroit, MI 48232-5136 In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French).
Page 510: Service Publications Ordering Information
Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc. Transmission, Transaxle, Transfer Case Unit Repair Manual This manual provides information on unit repair service procedures, adjustments, and speciﬁcations for GM transmissions, transaxles, and transfer cases.
Page 511: Owner Information
Owner Information Owner publications are written speciﬁcally for owners and intended to provide basic operational information about the vehicle. The owner manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner Manual, and Warranty Booklet. RETAIL SELL PRICE: $35.00US + Processing Fee Without Portfolio: Owner’s Manual only.
Page 512 NOTES...
Page 513 Accessories and Modiﬁcations ... 354 Accessory Inﬂator ... 425 Accessory Power Outlet(s) ... 199 Adding Equipment to Your Airbag-Equipped Vehicle ... 103 Additives, Fuel ... 357 Add-On Electrical Equipment ... 462 Air Cleaner/Filter, Engine ... 370 Air Conditioning ... 200, 203, 206 Airbag Passenger Status Indicator ...
Page 514 Ashtray(s) ... 200 Audio System(s) ... 250 Audio Steering Wheel Controls ... 296 Care of Your CD and DVD Player ... 298 Care of Your CDs and DVDs ... 298 Fixed Mast Antenna ... 299 Navigation/Radio System, see Navigation Manual ... 277 Radio with CD ...
Page 515 Carbon Monoxide ... 118, 140, 327, 340 Care of Safety Belts ... 455 Your CD and DVD Player ... 298 Your CDs and DVDs ... 298 Cargo Cover ... 165 Cargo Lamp ... 192 Cell Phone Storage Area ... 159 Center Rear Passenger Position, Safety Belts ...
Page 516 Collision Damage Repair ... 504 Comfort Guides, Rear Safety Belt ... 53 Compact Spare Tire ... 450 Compass ... 238 Content Theft-Deterrent ... 122 Control of a Vehicle ... 306 Convenience Center, Rear ... 165 Convenience Net ... 164 Coolant Engine Temperature Gage ...
Page 517 Driver Information Center (DIC) (cont.) DIC Vehicle Personalization ... 240 Driving At Night ... 317 City ... 321 Defensive ... 302 Drunken ... 303 Freeway ... 322 Hill and Mountain Roads ... 325 In Rain and on Wet Roads ... 318 Rocking Your Vehicle to Get it Out ...
Page 518 Filter Engine Air Cleaner ... 370 Finish Damage ... 459 Fixed Mast Antenna ... 299 Flashers, Hazard Warning ... 176 Flash-to-Pass ... 179 Flat Tire ... 427 Flat Tire, Changing ... 428 Flat Tire, Storing ... 444 Fluid Automatic Transaxle ... 372 Power Steering ...
Page 519 Hatch Ajar Warning Message ... 230 Hazard Warning Flashers ... 176 Head Restraints ... 15 Headlamp Wiring ... 462 Headlamps Automatic Headlamp System ... 187 Bulb Replacement ... 399 Daytime Running Lamps ... 186 Exit Delay ... 189 Flash-to-Pass ... 179 Halogen Bulbs ...
Page 520 Labeling, Tire Sidewall ... 407 Lamps Battery Run-Down Protection ... 192 Cargo ... 192 Exterior ... 185 Fog ... 187 Front Reading ... 191 Interior ... 188 Interior Control ... 188 Rear Reading ... 191 LATCH System Child Restraints ... 69 Level Control ...
Page 521 Maintenance Schedule Additional Required Services ... 478 At Each Fuel Fill ... 481 At Least Once a Month ... 481 At Least Once a Year ... 482 Introduction ... 472 Maintenance Footnotes ... 479 Maintenance Record ... 488 Maintenance Requirements ... 472 Normal Maintenance Replacement Parts ...
Page 522 Navigation/Radio System, see Navigation Manual ... 277 New Vehicle Break-In ... 127 Normal Maintenance Replacement Parts ... 486 Odometer ... 213 Odometer, Trip ... 213 Off-Road Recovery ... 313 Engine ... 365 Pressure Message ... 229 Oil, Engine Oil Life System ... 368 Older Children, Restraints ...
Page 523 Power Accessory Outlet(s) ... 199 Door Locks ... 115 Electrical System ... 462 Reduced Engine Message ... 228 Retained Accessory (RAP) ... 129 Seat ... 10 Steering Fluid ... 387 Windows ... 121 Pretensioners, Safety Belt ... 56 Program Mode Message ... 233 Programmable Automatic Door Locks ...
Page 524 Remote Keyless Entry Transmitter Battery Low Warning Message ... 234 Removing the Flat Tire and Installing the Spare Tire ... 436 Removing the Spare Tire and Tools ... 429 Replacement Bulbs ... 404 Replacement, Windshield ... 404 Reporting Safety Defects Canadian Government ...
Page 525 Seats (cont.) Memory, Mirrors ... 11 Power Seats ... 10 Rear Seat Operation ... 15 Reclining Seatbacks ... 13 Split Bench Seats ... 15 Stowable Seat ... 26 Secondary Latch System ... 441 Securing a Child Restraint Center Rear Seat Position ... 82 Rear Outside Seat Position ...
Page 526 Storage Areas (cont.) Rear Storage Area ... 160 Roof Rack System ... 161 Stowable Seat ... 26 Stuck in Sand, Mud, Ice, or Snow ... 331 Sun Visors ... 122 Sunroof ... 169 Surge Tank Pressure Cap, SGCM Coolant ... 226 Switchbanks, Instrument Panel ...
Page 527 Towing Recreational Vehicle ... 338 Towing a Trailer ... 340 Your Vehicle ... 337 Traction Active Message ... 227 Control System (TCS) ... 310 Control System Warning Light ... 220 Service Traction System Warning Message ... 226 Transaxle Fluid, Automatic ... 372 Transaxle Operation, Automatic ...
Page 528 Warning Lights, Gages and Indicators ... 211 Warnings Hazard Warning Flashers ... 176 Other Warning Devices ... 176 Safety and Symbols ... 4 Vehicle Damage ... 5 Washer Fluid Low Warning Message ... 231 Wheels Alignment and Tire Balance ... 422 Different Size ...

Save PDF