Remote Control - Buick Enclave 2008 Owner's Manual

Remote Control

To use the remote control, aim it at the transmitter
window at the rear of the overhead console and press
the desired button. Direct sunlight or very bright light
could affect the ability of the RSE transmitter to receive
signals from the remote control. If the remote control
does not seem to be working, the batteries might need
to be replaced. See "Battery Replacement" later in
this section. Objects blocking the line of sight could
also affect the function of the remote control.
If a CD or DVD is in the Radio DVD slot, the remote
control O button can be used to turn on the video
screen display and start the disc. The radio can also
turn on the video screen display. See Radio(s) (MP3)
on page 3-78 for more information.
Notice: Storing the remote control in a hot area or
in direct sunlight can damage it, and the repairs
will not be covered by your warranty. Keep the
remote control stored in a cool, dry place.
3-112
Remote Control Buttons
O (Power): Press this button to turn the video screen
on and off.
P
(Illumination): Press this button to turn the remote
control backlight on. The backlight automatically times
out after seven to ten seconds if no other button is
pressed while the backlight is on.
v
(Title): Press this button to return the DVD to the
main menu of the DVD. This function could vary for
each disc.