License Plate Lamp; Replacement Bulbs - Buick 2016 Envision Owner's Manual

Hide thumbs Also See for 2016 Envision:

Table of Contents

Vehicle Care

License Plate Lamp

Lamp Assembly

Bulb Assembly

To replace one of these bulbs:

1. Push the left end of the lamp

assembly toward the right.

2. Turn the lamp assembly down

to remove it.

3. Turn the bulb socket (1)

counterclockwise to remove it

from the lamp assembly (3).

4. Pull the bulb (2) straight out of

the bulb socket (1).

5. Push the replacement bulb

straight into the bulb socket

and turn the bulb socket

clockwise to install it into the

lamp assembly.

6. Turn the lamp assembly into

the lamp assembly opening

engaging the clip side first.

7. Push on the lamp side opposite

the clip until the lamp assembly

snaps into place.

Exterior Lamp

License Plate Lamp

For replacement bulbs not listed

here, contact your dealer.

Table of Contents