Malfunction Indicator Lamp - Buick Enclave 2008 Owner's Manual

Hide thumbs Also See for Enclave 2008:
Table of Contents

Advertisement

Malfunction Indicator Lamp

Check Engine Light
This system is called OBD II (On-Board
Diagnostics-Second Generation) and is intended to make
sure that emissions are at acceptable levels for the life of
the vehicle, helping to produce a cleaner environment.
The check engine light comes on to indicate that there
is a problem and service is required. Malfunctions often
will be indicated by the system before any problem is
apparent. This can prevent more serious damage to
your vehicle. This system is also designed to assist
your service technician in correctly diagnosing any
malfunction.
Notice: If you keep driving your vehicle with this
light on, after a while, the emission controls might
not work as well, your vehicle's fuel economy might
not be as good, and the engine might not run as
smoothly. This could lead to costly repairs that might
not be covered by your warranty.
Your vehicle has a
computer which monitors
operation of the fuel,
ignition, and emission
control systems.
Notice: Modifications made to the engine,
transmission, exhaust, intake, or fuel system of
your vehicle or the replacement of the original tires
with other than those of the same Tire Performance
Criteria (TPC) can affect your vehicle's emission
controls and can cause this light to come on.
Modifications to these systems could lead to costly
repairs not covered by your warranty. This could
also result in a failure to pass a required Emission
Inspection/Maintenance test. See Accessories
and Modifications on page 5-3.
This light should come on, as a check to show you it
is working, when the ignition is on and the engine is not
running. If the light does not come on, have it repaired.
This light will also come on during a malfunction in
one of two ways:
Light Flashing — A misfire condition has been
detected. A misfire increases vehicle emissions
and could damage the emission control system
on your vehicle. Diagnosis and service might
be required.
Light On Steady — An emission control system
malfunction has been detected on your vehicle.
Diagnosis and service might be required.
3-45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents