Connecting To External Ducting; Fitting The Chimney - Baumatic BTC6720BL User Manual

Connecting to external ducting

8) Connect the coupling to the top of the cooker hood, and then
connect a 125 mm ducting hose to the coupling (please note that the
ducting hose is not supplied with the appliance).
o The other end of the ducting hose should be connected to a
discharge outlet that is suitable for cooking vapours. It should
have a cross section of at least 150 cm².
o The maximum distance between the coupling and your discharge
outlet should be 3 metres, with one 90 degree bend. For each
additional 90 degree bend, the maximum distance is reduced by
a further metre.

Fitting the chimney

9) Take the two chimney sections
(C) and (D).
o Rest the bottom of chimney
section (C) on the top of the
hood. You should take care to
position the
chimney section into the rear
of the hood.
o Mark the side measurement of
both sides of the chimney
section (C) on the wall with a
pencil.
tabs on the
25