HP Pavilion 15 Maintenance And Service Manual page 92

Notebook pc
Table of Contents

Advertisement

2.
Remove the two Phillips M2.5×6.5 and M2.0×5.0 screws (1). Remove the bracket (2) that
secures the power connector bracket to the base enclosure.
3.
Remove the three Phillips M2.5×5.0 screws (1) that secure the system board to
the base enclosure.
4.
Lift the right side of the system board (2) until it rests at an angle.
82
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pavilion touchsmart 15

Table of Contents