Download Print this page

Care And Cleaning; Planetary Mixing Action; Stand Mixer Use - KitchenAid Bowl-Lift Mixer Instructions Manual

Hide thumbs


Bowl, white flat beater and white
dough hook may be washed in an
automatic dishwasher. Or, clean them
thoroughly in hot sudsy water and
rinse completely before drying. Do not
store beaters on shaft.
During operation, the
flat beater moves
around the
stationary bowl, at
the same time
turning in the
opposite direction on its
own axis. The diagram shows the
Injury Hazard
Unplug mixer before touching
Failure to do so can result in
broken bones, cuts or bruises.
NOTE: Do not scrape bowl while
Stand Mixer is operating.

Care and Cleaning

Planetary Mixing Action

Stand Mixer Use

NOTE: Always be sure to unplug
Stand Mixer before cleaning. Wipe
Stand Mixer with a soft, damp cloth.
Do not use household/commercial
cleaners. Do not immerse in water.
Wipe off beater shaft frequently,
removing any residue that may
complete coverage of the bowl made
by the path of the beater.
Your KitchenAid
faster and more thoroughly than most
other electric mixers. Therefore, the
mixing time in most recipes must be
adjusted to avoid overbeating.
The bowl and beater are designed to
provide thorough mixing without
frequent scraping. Scraping the bowl
once or twice during mixing is usually
sufficient. Turn unit off before
The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time, you may not be able to
comfortably touch the top of the unit.
This is normal.
Stand Mixer will mix



  Related Manuals for KitchenAid Bowl-Lift Mixer