Mixing And Kneading Yeast Dough - KitchenAid Bowl-Lift Mixer Instructions Manual

Mixing and Kneading Yeast Dough

Kneading Yeast Doughs Using the
PowerKnead™ Spiral Dough Hook
1. Place all dry ingredients including
yeast into bowl, except last 1 to
2 cups (125 to 250 gr) flour.
2. Attach bowl and PowerKnead™
Spiral Dough Hook. Raise mixer
bowl. Turn to Speed 2 and mix
about 15 seconds, or until
ingredients are combined.
3. Continuing on Speed 2, gradually
add liquid ingredients to flour
mixture and mix 1 to 2 minutes
longer.
NOTE: If liquid ingredients are added
too quickly, they will form a pool
around the PowerKnead™ Spiral
Dough Hook and slow down mixing
process.
4. Continuing on Speed 2, gently add
remaining flour,
time, as needed. Mix until dough
starts to clean sides of bowl, about
2 minutes.
1 ⁄ cup (60 gr) at a
2
5. Knead on Speed 2 for 2 more
minutes, or until dough is smooth
and elastic.
6. Lower bowl on Stand Mixer and
remove dough from the bowl and
PowerKnead™ Spiral Dough Hook.
NOTE: These instructions illustrate
bread making with the Rapid Mix
method. When using the conventional
method, dissolve yeast in warm water
in warmed bowl. Add remaining
liquids and dry ingredients - except
last 1 to 2 cups (125 to 250 gr) flour.
Turn to Speed 2 for about
1 minute, or until ingredients are
thoroughly mixed. Proceed with
Steps 4 through 6.
9