Download Print this page

Assembling Your Pouring Shield - KitchenAid Bowl-Lift Mixer Instructions Manual

Hide thumbs

Advertisement

Assembling Your Pouring Shield*

To Attach Wide Mouth
Pouring Shield (fits all 6-quart
bowl-lift models)
1. Turn speed control "O"
2. Unplug Stand Mixer or disconnect
power.
3. Place bowl-lift handle in down
position.
4. Attach desired accessory (flat beater,
dough hook or wire whip) and bowl.
5. Place bowl-lift handle in up position.
6. Slide pouring shield collar around
beater shaft, centering collar over rim
of bowl. Then, rotate opening in
collar toward front of Stand Mixer.
Pouring
Shield
Collar
7. Fit tabs on the side of pouring
chute into notches on the collar.
8. Fit the three notched guides on
bottom of chute along rim of bowl.
To Remove Wide Mouth
Pouring Shield
1. Turn speed control "O".
2. Unplug Stand Mixer or disconnect
power.
3. Remove pouring chute from collar.
4. Slide pouring shield collar off bowl.
5. Place bowl-lift handle in down position
and remove accessory and bowl.
To Use Pouring Shield
1. Pour ingredients into bowl through
pouring chute.
2. Important: when using the Wide
Mouth Pouring Shield, make sure
the guides on the bottom of the
chute rest on the rim of the bowl
to keep ingredients from falling
outside the bowl as they are added.
To Attach Pouring Shield (fits all
5-quart bowl-lift models)
1. Turn speed control "O".
2. Unplug Stand Mixer or disconnect
power.
3. Place bowl-lift handle in down
position.
4. Attach desired accessory (flat
beater, dough hook or wire whip)
and bowl.
5. Place bowl-lift handle in up
position.
6. Place the back half of the shield
(without the chute) on rim of
the bowl.
Pouring
Chute
Tabs
Notched
Guides
7. Insert the tabs on the front half of
the shield (with the chute) under
the tab openings on the back half
of the shield, then lower the shield
to lock into place.
To Remove Pouring Shield
1. Turn speed control "O".
2. Unplug Stand Mixer or disconnect
power.
3. Lift pouring chute from bowl.
4. Slide back half of the shield off
bowl.
5. Place bowl-lift handle in down
position and remove accessory and
bowl.
To Use Pouring Shield
1. Pour ingredients into bowl through
pouring chute.
* If Pouring Shield is included.
4
Tab
Pouring
Chute

Advertisement

loading

  Related Manuals for KitchenAid Bowl-Lift Mixer