When using electrical appliances, basic
safety precautions should always be
followed including the following:
1. Read all instructions.
2. To protect against risk of
electrical shock, do not put Stand
Mixer in water or other liquid.
3. Close supervision is necessary
when any appliance is used by or
4. Unplug Stand Mixer from outlet
when not in use, before putting
on or taking off parts and before
5. Avoid contacting moving parts.
Keep hands, hair, clothing, as
well as spatulas and other
utensils away from beater during
operation to reduce the risk of
injury to persons and/or damage
to the Stand Mixer.
6. Do not operate Stand Mixer with
a damaged cord or plug or after
SAVE THESE INSTRUCTIONS
Your Stand Mixer operates on a
regular 220-240 volt A.C., 50/60 hertz
house current. The wattage rating for
your Stand Mixer is printed on the
trim band. This wattage is determined
by using the attachment which draws
the greatest power. Other
recommended attachments may draw
significantly less power.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman
install an outlet near the appliance.
the Stand Mixer malfunctions, or
is dropped or damaged in any
manner. Return appliance to the
nearest Authorized Service Center
for examination, repair or electrical
or mechanical adjustment.
7. The use of attachments not
recommended or sold by
KitchenAid may cause fire,
electrical shock or injury.
8. Do not use the Stand Mixer
9. Do not let the cord hang over
edge of table or counter.
10. Remove flat beater, wire whip or
dough hook from Stand Mixer
11. The appliance is not intended for
use by young children or infirm
persons without supervision.
12. Young children should be
supervised to ensure that they do
not play with the appliance.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.