Cleaning The Spark Arrester - Yamaha TT-R125E Owner's Manual

8. Install the sponge material onto
the frame, place the air filter ele-
ment in the original position on the
guide, and then tighten the wing
nut.
1. Air filter sponge material
2. Washer
3. Nut
9. Insert the air filter element into the
air filter case. NOTICE: Make sure
that the air filter element is prop-
erly seated in the air filter case.
The engine should never be op-
erated without the air filter ele-
ment installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively
[ECA10481]
PERIODIC MAINTENANCE AND ADJUSTMENT
10. Install the air filter case cover by in-
stalling the band.
11. Install the panel.
Checking and cleaning the air filter
case check hoses
1. Check the air filter case check hos-
es for accumulation of dust or wa-
ter.
1. Air filter check hose plug
2. Air filter check hose
2. If dirt or water is visible, remove
the hoses, clean them, and then
install them.
worn.

Cleaning the spark arrester

The spark arrester should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
G
G
1
TIP
2
Make sure to select a well-ventilated
area free of combustible materials to
clean the spark arrester.
1. Remove the spark arrester cap by
7-11
WARNING
Always let the exhaust system
cool prior to touching exhaust
components.
Do not start the engine when
cleaning the exhaust system.
removing the bolts, and then pull
the spark arrester out of the muf-
fler.
EAUW0450
EWA10980
7