Yamaha TT-R125E Owner's Manual page 42

FOR YOUR SAFETY – PRE-OPERATION CHECKS
ITEM
Rear brake
Clutch
Throttle grip
Control cables
5
Drive chain
Wheels and tires
Brake and shift pedals
Brake and clutch levers
Sidestand
Chassis fasteners
Engine stop switch
• Check operation.
• Check pedal free play.
• Adjust if necessary.
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
CHECKS
5-2
PAGE
7-19, 7-20, 7-20
7-16
7-13, 7-24
7-24
7-22, 7-24
7-14, 7-16
7-25
7-25
7-26
—
4-1