Yamaha TT-R125E Owner's Manual page 69

1. Drive chain slack
4. If the drive chain slack is incorrect,
adjust it as follows.
To adjust the drive chain slack
1. Loosen the brake pedal free play
adjusting nut.
2. Loosen the axle nut.
3. To tighten the drive chain, turn the
drive chain slack adjusting plate on
each side of the swingarm in direc-
tion (a). To loosen the drive chain,
turn the adjusting plate on each
side of the swingarm in direction
(b), and then push the rear wheel
forward. NOTICE: Improper drive
chain slack will overload the en-
gine as well as other vital parts
PERIODIC MAINTENANCE AND ADJUSTMENT
of the motorcycle and can lead
to chain slippage or breakage.
To prevent this from occurring,
keep the drive chain slack with-
in the specified limits.
TIP
Make sure that both adjusting plates
are in the same position for proper
wheel alignment.
EAUW0661
1. Axle nut
2. Drive chain slack adjusting plate
3. Position indicator
4. Tighten the axle nut to the speci-
fied torque.
Tightening torque:
Axle nut:
60 Nm (6.0 m·kgf, 43 ft·lbf)
5. Adjust the brake pedal free play.
[ECA10571]
7-23
(See page 7-19.)
7