Sidestand - Yamaha TT-R125E Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
pression damping force and thereby
soften the compression damping, turn
the adjusting knob in direction (b).
4
1. Compression damping force adjusting knob
Compression damping setting:
Minimum (soft):
1 clicks in direction (a)*
Standard:
9 clicks in direction (a)*
Maximum (hard):
12 clicks in direction (a)*
* With the adjusting knob fully turned
in direction (b)
TIP
To obtain a precise adjustment, it is ad-
visable to check the actual total number
of clicks or turns of the damping force
adjusting mechanism. This adjustment
range may not exactly match the spec-
ifications listed due to small differences
in production.
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
G Do not tamper with or attempt to
open the cylinder assembly.
G
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
G
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
G Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
4-10

Sidestand

EWA10221
1. Sidestand
The sidestand is located on the left side
of the frame. Raise the sidestand or
lower it with your foot while holding the
vehicle upright.
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
EAU37490
EWA14190