Adjusting The Front Fork; Adjusting The Shock Absorber; Assembly - Yamaha TT-R125E Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Adjusting the front fork

WARNING
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
This front fork is equipped with spring
preload adjusting bolts.
NOTICE
4
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
load and thereby
suspension, turn the adjusting bolt on
each fork leg in direction (b).
EAU14722
EWA10180
ECA10101
1. Adjusting bolt
Align the appropriate groove on the ad-
justing mechanism with the top of the
front fork cap bolt.
Spring preload setting:
Minimum (soft):
4
Standard:
4
Maximum (hard):
soften the
1

Adjusting the shock absorber

assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing nut, a rebound damping force ad-
justing
damping force adjusting knob.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
1. Loosen the locknut.
2. To increase the spring preload and
4-8
dial and a compression
thereby harden the suspension,
turn the adjusting nut in direction
(a). To decrease the spring pre-
load and thereby soften the sus-
pension, turn the adjusting nut in
direction (b).
EAUW0475
ECA10101