Table of Contents
Advertisement
F
O
ACTORY
DOR REMOVAL
Wash the interior of the cooler with a mild detergent and warm water. Leave
the door open and allow it to air dry thoroughly. If a "plastic" smell persists,
place a dish of baking soda in the unit or stuff the cooler with newspapers
overnight. When finished, let the unit run a full day to complete the airing out
process.
OPERATING INSTRUCTIONS
OPERATING ENVIRONMENT
It is recommended that the wine cooler be installed in an area where the
ambient temperature is between 50°- 80°F (10° - 26°C). If the ambient
temperature is above or below the recommended ranges, the unit's
performance may be affected, and extreme cold or hot conditions may cause
the interior temperature to fluctuate. This will prevent the optimal range of
50°- 60°F (10°-16°C) from being reached. In addition, keep in mind that the
temperature may fluctuate depending on whether the interior light is on or off,
and whether the bottles are located on the upper, middle, or lower racks.
HOW TO USE THE BUTTONS ON THE DISPLAY PANEL
B
F
UTTON
UNCTIONS
Raise the desired
temperatures.*
* The interior temperature can be adjusted in increments of 1 degree between
54° and 66°F (12° - 18°C).
Love Your Home
7
Lower the desired
temperature. *
Turn the light on
and off.
Hide quick links:
Advertisement
Table of Contents
