Advertisement
OPERATING YOUR WINE COOLER
•
For optimal performance, it is recommended that you keep the wine cooler in a place where the
ambient temperature is between 50 ‐ 80°F (10 ‐ 26°C). If the ambient temperature is above or below
the recommended temperature range, the unit's performance may be affected. Using the wine cooler
in extremely cold or hot conditions may cause interior temperatures to fluctuate, and as a result, the
ideal range of 50 ‐ 60°F (10 ‐ 16°C) may not be reached.
•
The temperature may also fluctuate depending on whether the interior light is on and whether the
bottles are located on the upper, middle or lower racks.
Adjusting the Temperature and the Interior Light:
•
Press the buttons on the display panel to turn on the interior light and to set the temperature.
•
The two buttons on the panel ‐ " " and " " ‐ adjust the temperature in increments of 1°F between 46
‐ 66°F. You can also switch the interior light on or off by pressing the " " button.
CARE AND MAINTENANCE
Cleaning YourWine Cooler
•
Unplug the wine cooler from the power supply and remove any wine bottles from the unit.
•
Clean the inside of the wine cooler with a warm water and baking soda solution. The solution should
consist of 2 tablespoons of baking soda to one quart of water.
•
Clean the outside of the wine cooler with mild detergent and warm water.
•
Remove the water reservoir from the bottom of the unit and rinse it with water.
Transporting YourWine Cooler
•
Remove all bottles from the unit.
•
Securely tape down the shelves inside the wine cooler.
•
Screw the leveling legs up to the unit's base to avoid damage.
•
Tape the door shut.
•
Make sure the wine cooler stays in an upright position during transportation.
Advertisement
