Download Print this page

Operating Instructions; How To Use The Buttons On The Display Panel - NewAir AWC-330E Owner's Manual

33 bottle freestanding compressor wine cooler
Hide thumbs

Advertisement

Place the cooler on a level surface that will be strong enough to support
the unit when it is fully loaded. To level your cooler, adjust the front feet
located at the bottom of the unit.
Install the cooler away from direct sunlight and heat sources such as
stoves, heaters, or radiators. Direct sunlight may affect the unit's acrylic
coating, and nearby heat sources can increase electrical consumption.
Extreme cold or hot ambient temperatures may also prevent proper
performance.
Once the cooler is plugged in, let the wine cooler run for at least 30
minutes. Do not change the temperature or adjust any settings at this
time.

OPERATING INSTRUCTIONS

HOW TO USE THE BUTTONS ON THE DISPLAY PANEL

Turn the light on and
off.
* The interior temperature of the upper zone can be adjusted in increments of
1 degree between 39°F and 64°F (4° - 18C).
To change the temperature readout to either Fahrenheit or Celsius,
simultaneously press and hold the UP and DOWN buttons for at least 3
seconds.
7
Raise the desired
temperatures.*
Love Your Home
Lower the desired
temperature. *

Hide quick links:

Advertisement

loading

  Also See for NewAir AWC-330E

  Related Manuals for NewAir AWC-330E