Product Diagram 1. REAM COVER 4. SHELVES 7. LIGHT SWITCH 10. DOOR HANDLE Important Safety Instructions To reduce the risk of fire, electrical shock, or injury when using this appliance, follow these basic precautions: Read all instructions before operating the wine cooler. ATTENTION: To prevent the risk of child entrapment, do not allow children to operate, play with, or crawl inside the unit.
Installation Instructions Before operating your wine cooler for the first time, follow these steps: Remove the exterior and interior packaging. Check to make sure the following parts are included: 6 slide-out shelves 1 instruction manual Before connecting the unit to a power source, allow it stand upright for approximately 2 hours. This will reduce the possibility of any system malfunctions which may have occurred from handling during transportation.
Operating Your Wine Cooler It is recommended that the wine cooler be installed in an area where the ambient temperature is between 10-26 ۦC (50- 80° F). If the ambient temperature is above or below the recommended ranges, the unit’s performance may be affected, and extreme cold or hot conditions may cause the interior temperature to fluctuate.
Troubleshooting To troubleshoot your wine cooler, follow the suggestions below to address the most common problems before seeking assistance from a service center: PROBLEM The wine cooler will not operate. The wine cooler is not cold enough. The light does not work. The wine cooler vibrates while operating.