Fire Sense 60950 User Manual page 8

Attach the Post Support Plate (F)/Lower Post (E) to the Tank
3.
Housing Assembly (G/H). (NOTE: Make sure Firesense
forward directly over the Tank Housing Support Bar.)
Align the holes in the Post Support Plate (F) With the holes in the top of
the Tank Housing Assembly (G/H) and insert a total of 12 M4x10 (CC)
bolts into the holes and loosely tighten.
Once all bolts have been inserted, tighten with a wrench.
Hardware Used: 12 x CC, Bolt M4x10
Attach Tank Housing Door (I) to the Tank Housing Assembly (G)
4.
by sliding the pins on the side of the door into the hinges located on
the right side of the Tank Housing Assembly (G).
you hold door to the SIDE of the Tank Housing Assembly before
trying to align pins. If you hold door to the FRONT of the Tank
Housing Assembly, you will NOT be able to align pins correctly.)
ASSEMBLY
logo is facing
®
4
(NOTE: Make sure
8
3