Network Setup - D-Link DNR-326 User Manual

Section 3 - Configuration
Network Setup allows you to configure the LAN settings for your NAS device.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be automatically
updated to your NVR.
Static IP: You may obtain a static or fixed IP address and other network
information from your network administrator for your NVR. A static IP
address will simplify access to your NVR in the future.
IP Address: The fixed IP address.
Subnet Mask: The default value 255.255.255.0 is used to determine if the destination
is in the same subnet.
Gateway IP The gateway forwards frames to destinations in a different subnet.
Address:
Invalid gateway settings may cause the failure of transmissions to a
different subnet.
DNS1:
Primary domain name server that translates names to IP addresses.
DNS2:
Secondary domain name server to backup the primary one.
PPPoE Settings:
Enable this setting if your ISP (DSL service) is using PPPoE. You may
already have a Username and Password provided by your ISP, or you
may need to contact your ISP. The connection status will be determined
automatically by the system.
DHCP server:
Enable or disable the DHCP server. If your network doesn't have DHCP
server, enable NVR DHCP server for easier local network setup.
D-Link DNR-326 User Manual

Network Setup

20