Network Setup - D-Link Mydlink DNR-322L User Manual

Section 3 - Configuration
DHCP: Select this connection if you have a DHCP server
running on your network and would like a
dynamic IP address to be automatically updated
to your NVR.
Static IP: You may obtain a static or fixed IP address and
other network information from your network
administrator for your NVR. A static IP address
will simplify access to your NVR in the future.
IP Address:
The fixed IP address.
Subnet Mask: The default value "255.255.255.0" is used to
determine if the destination is in the same
subnet.
Gateway IP The gateway forwards frames to destinations in
Address: a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different
subnet.
DNS1: Primary domain name server that translates
names to IP addresses.
DNS2: Secondary domain name server to backup the primary one.
PPPoE Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by your ISP,
Settings:
or you may need to contact your ISP. The connection status will be determined automatically by the system.
DHCP server: Enable or disable the DHCP server. If your network doesn't have DHCP server, enable NVR DHCP server for easier local network setup.
D-Link DNR-322L User Manual

Network Setup

33