Auto Search Camera - D-Link DNR-326 User Manual

Section 3 - Configuration
Please connect your network camera(s) to the network and power them on.
The NVR will search for your available camera(s) in the local network (LAN) and add them to the NVR List in the NVR
automatically.
The NVR will use the default login ID admin and a blank password to add new camera(s).
If there are camera(s) found, the NVR will start manual recording at the last step.
Note: If you have an existing camera(s) with different ID and password,
NVR will add the the camera(s) but it will not be able to connect and record.
You can change the settings in the NVR Setup page.
Click Exit Wizard to finish the auto search.
D-Link DNR-326 User Manual

Auto Search Camera

Type admin for the username and
leave the password field blank.
Click Login
16