Network Setup - D-Link ShareCenter Pulse DNS-320 User Manual

Section 3 - Installation
ou may use either Static IP or DHCP to configure the IP network settings of the
ShareCenter Pulse. If you select Static IP then input the IP network settings. Click Next
to continue.
If you want your ShareCenter Pulse to be part of a Windows Workgroup network, enter
the parameters requested or leave the default settings that appear initially in the window.
The name will be used whenever you map one of the ShareCenter Pulse volumes as a
Network Drive. Click Next to continue.
D-Link ShareCenter Pulse DNS-320 User Manual

Network Setup

12