Status; Camera Status - D-Link DNR-326 User Manual

Section 3 - Configuration
This page displays the connection and recording status of your cameras.
Connection Shows the camera connection status. The user can click Connect or

Status:

Disconnect to change the connection status.
Recording
Shows the recording schedule and current recording status of the
Status:
cameras. Please note that if the camera is disconnected, the recording
may continue but will produce blank video.
Frame Rate:
Displays the frame rate of the camera.
Bit Rate:
Displays the transmission bit rate of the camera.
Note: If the Frame Rate or Bit Rate is too low, please check your network
configuration between the cameras and the NVR. If the bit rate is too
high, it will cause the Live Video display to slow or lag. Please modify
the quality or bitrate setting in the camera web GUI accordingly.
Disk Status:
Shows the hard drive space and estimated remaining recording time
status.
Note: The recording time information is estimated by current bit rate.
This may change each time a user refreshes this page.
D-Link DNR-326 User Manual
Status

Camera Status

40