Setup; Network; Network Setup - D-Link DNR-322L User Manual

Section 4 - Configuration
Network Setup lets you configure how you connect the NVR to the Internet.
DHCP: Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be automatically updated to your
NVR.
Static IP: You may obtain a static or fixed IP address and other network information
from your network administrator for your NVR. A static IP address will
simplify access to your NVR in the future.
IP Address: The fixed IP address.
Subnet The default value 255.255.255.0 is used to determine if the destination is
Mask: in the same subnet.
Gateway IP The gateway forwards frames to destinations in a different subnet. Invalid
Address: gateway settings may cause the failure of transmissions to a different
subnet.
DNS1: Primary domain name server that translates names to IP addresses.
DNS2: Secondary domain name server to backup the primary one.
Enable Enable this setting if your ISP (DSL service) is using PPPoE. You may
PPPoE already have a Username and Password provided by your ISP, or you
may need to contact your ISP. The connection status will be determined
automatically by the system.
DHCP
Enable or disable the DHCP server. If your network doesn't have a DHCP
server:
server, enable this feature for easier local network setup.
D-Link DNR-322L User Manual

Setup

Network

Network Setup

322L
38