Headlight adjustment lever for loaded
conditions
1
cgin
1. Headlight adjuster lever (unloaded
position)
2. Headlight adjuster lever (loaded
position)
For
normal
(unloaded)
headlight adjuster lever should be set in the
horizontal position (1).
For loaded conditions rotate the headlight
adjuster downwards until it stops (2). This will
lower
the
headlight
approximately 2°.
Maintenance and Adjustment
Headlight Bulb Replacement
The use of non-approved headlight bulbs
may result in damage to the headlight lens.
Use a genuine Triumph supplied headlight
bulb as specified in the Triumph Parts
Catalogue.
Always have replacement headlight bulbs
installed by an authorized Triumph dealer.
It is not necessary to remove the headlight
when bulb replacement becomes necessary.
2
conditions
the
beams
by
cgjn
1. Bulb retainer (right hand shown)
2. Bulb retainer hook
3. Bulb
The bulbs become hot during use. Always
allow sufficient time for the bulb to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before reuse.
Caution
3
1
2
Warning
111