Moving Off; Shifting Gears - Triumph Tiger 800 Owner's Handbook Manual

Triumph tiger 800 motorcycles owner's handbook
Hide thumbs Also See for Tiger 800:
Table of Contents

Advertisement

How to Ride the Motorcycle

Moving Off

Pull in the clutch lever and select first gear.
Open the throttle a little and let out the clutch
lever slowly. As the clutch starts to engage,
open the throttle a little more, allowing
enough engine speed to avoid stalling.

Shifting Gears

1
cgiu
1. Gear-shift pedal
Close the throttle while pulling in the
6
clutch lever. Shift into the next higher
5
4
or lower gear. Open the throttle part
3
way, while releasing the clutch lever.
2
N
Always use the clutch when shifting
1
gear.
58
Warning
Take care to avoid opening the throttle too
far or too fast in any of the lower gears as
this can lead to the front wheel lifting from
the ground (pulling a 'wheelie') and to the
rear tire breaking traction (wheel spin).
Always
open
the
throttle
particularly if you are unfamiliar with the
motorcycle, as a 'wheelie' or loss of traction
will cause loss of motorcycle control and an
accident.
Note:
The gear shift mechanism is the
'positive stop' type. This means
that, for each movement of the
gear shift pedal, you can only
select each gear, one after the
other, in ascending or descending
order.
Warning
Do not shift to a lower gear at speeds that
will cause excessive engine rpm (r/min).
This can lock the rear wheel causing loss of
control and an accident. Engine damage
may also be caused. Shifting down should
be done such that low engine speeds will
be ensured.
cautiously,

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tiger 800xc

Table of Contents