Inspecting The Steering (Steering Head) Bearings For Free Play; Wheel Bearings Inspection - Triumph Tiger 800 Owner's Handbook Manual

Maintenance and Adjustment
Inspecting the Steering (Steering
Head) Bearings for Free Play
Inspecting the Steering for
Free Play
Inspection
Position the motorcycle on level ground, in an
upright position.
Raise the front wheel above the ground and
support the motorcycle.
Standing at the front of the motorcycle, hold
the lower end of the front forks and try to
move them forward and backward.
If any free play can be detected in the
steering (steering head) bearings, ask your
authorized Triumph dealer to inspect and
rectify any faults before riding.
Warning
Riding the motorcycle with incorrectly
adjusted or defective steering (steering
head) bearings is dangerous and may
cause loss of motorcycle control and an
accident.
Remove the support and
motorcycle on the side stand.
96

Wheel Bearings Inspection

If the wheel bearings in the front or rear
wheel allow play in the wheel hub, are noisy,
or if the wheel does not turn smoothly, have
your authorized Triumph dealer inspect the
wheel bearings.
The wheel bearings must be inspected at the
intervals specified
maintenance chart.
Position the motorcycle on level ground, in an
upright position.
Raise the front wheel above the ground and
support the motorcycle.
Standing at the side of the motorcycle, gently
rock the top of the front wheel from side to
side.
If any free play can be detected, ask your
authorized Triumph dealer to inspect and
rectify any faults before riding.
Reposition the lifting device and repeat the
procedure for the rear wheel.
Operation with worn or damaged front or
rear wheel bearings is dangerous and may
cause impaired handling and instability
leading to an accident. If in doubt, have the
motorcycle inspected by an authorized
Triumph dealer before riding.
Remove the
motorcycle on the side stand.
place the
in the scheduled
Warning
support and place the