Ir Remote Controller - Nuvico AP-D1600 Manual

3. IR REMOTE CONTROLLER

1. POWER : This button turns the DVR off.
2. ID : This is button is to set the ID of the remote controller. Press this button 16 times or until the
DVR beeps to match the ID with the DVR
3. MON : This button is used to select different monitors to control. Pressing this button will turn on
LEDs on buttons 1-4 thereafter, press desired monitor number.
4. SEQ : This button is used to activate camera sequencing. Press and hold to activate Sequence
Tour List.
5. SELECT : This button is used to select a camera for PTZ control in multi display mode.
6. LOCK : This button is used to lock the buttons on the front panel/remote controller by logging off.
Press it again and then apply appropriate password to login.
7. BACKUP: This button is to enter BACKUP menu.
8. ACK : This button is used to manually turn off alarm relay and buzzer when set for unlimited
duration.
9. OSD : This button is used to change on screen display.
10. PANIC : This button is used to manually turn on/off the Panic recording mode. It can be manually
configured in Quick Setup menu.
13
APEX SERIES DVR