Exterior; End Of Life- Disposal - Mahindra E2O Owner's Manual

12.12 EXTERIOR

i. Washing:
• Dirt or grit can scratch body panel, while tree
sap & bird droppings can ruin the finish
permanently.
• Use antistatic brush provided in car for cleaning
car roof panel.
• Rinse vehicle thoroughly with cold water to
remove loose dirt.
• Mix mild detergent specially made for car, wash
with cold water.
• Wash car using sponge or soft cloth. Start from
top to bottom & rinse frequently.
• Check car body for tree sap and other foreign
particles. Clean it soon as possible to prevent
any stain marks on panel and harms finish.
• After washing, dry it with chamois or
towel.
• Use glass cleaner to clean vehicle glass.
ii. Wheels and wheel covers:
• Remove wheel covers carefully, wash & keep
on a soft surface so they do not get scratched.
• Use a mild detergent and soft brush to clean
wheels.
• Wash wheels & wheel caps with water.
12.12 EXTERIOR / 12.13 END OF LIFE - DISPOSAL
CAUTION
Do not use glass or plastic cleaner on
gauges / meter display lense covers
that may damage them & reduce
visibility.
Never use benzene, thinner to clean
any part of vehicle.
CAUTION
Vehicle owners should contact
distributor, MREVPL for disposal of used
vehicle parts / materials after it's end of
life.
Local distributor, MREVPL would guide
to engage necessary local accredited
agencies for disposal by abiding to local
laws & pollution control board
a soft
regulations.
12.13 END OF LIFE - DISPOSAL
As this is an electric vehicle, and many
electric & electronic parts are used in its
system. Part composition is given in next
column that can be recycled and after the
end of life of car & it has to be disposed
without causing pollution to environment.
COMPOSITION
Vehicle is made from steel, ABS panels,
Aluminum, Lead, Copper, wood, other
plastics, glass, rubber & misc. These are
reusable by recycling & also some are
hazardous to environment and living beings
hence to be disposed as per local pollution
board regulations.
DISPOSAL:
local
• As batteries are made of lithium & iron
phosphate with solvents as electrolyte
which are harmful, make impact on
environment are to be disposed as per local
pollution board regulations.
• Similarly ABS & other plastic panels,
materials used are to be disposed to
accredited agencies for recycling.
• Most of other materials are reusable, hence
components are to be segregated as per
their composition as hazardous and non
hazardous, disposed to accredited
recycling agencies.
Hence it is advised to contact authorized
service center or MREVPL for parts or vehicle
disposal.
Appearance & care
97