Indicator Lights - Mahindra E2O Owner's Manual

5.4 INDICATOR LIGHTS

TEMPERATURE LIGHT
III. TEMPERATURE LIGHT
This indication comes on blinking or solid in
driving/charging, indicating any of below
components having reached their maximum
operating temperature.
1. Battery 2. Charger
3. Motor 4. Motor controller
a) Flashing temperature light indicates EV
system temperature either too low or high
for normal usage.
b) Solid temperature light indicates EV
system temperature reaching its max
normal operating temperature.
c) During drive -
Solid light with message SLOW CAR, avoid
harsh driving with high acceleration.
Flashing light with message STOP CAR-
stop the car for few minutes untill light
goes OFF.
40
Instrument Cluster and Controls
CAUTION
In drive with light glowing red, will notice
that vehicle performance is reduced. Still
continuing to drive, temperature light will
flash and vehicle will soon stop to protect
its drive system.
NOTE
On charge, if light is solid, indicate
increase in charging time due to high
charging system temperature. If light is
flashing, then charging process will be
suspended due to very high charging
syste m te m p e rat u re . I f b atte r y
temperature is less than -5°C, it will not
charge.
LOW AUX 12V BATTERY LIGHT
IV. LOW AUX 12V BATTERY LIGHT
Light turns on solid once this battery
voltage goes very low.
!
EV WARNING LIGHT
V. EV WARNING LIGHT
EV warning light indicates system faults with
fault message on cluster. It also indicates
messages to user which can be read by
pressing & holding SET button for 5 sec's to
view messages. Press SET button again to view
more messages.
SERVICE LIGHT
VI. SERVICE LIGHT
This indicates
a) Service due- Flashing light for 20 sec's
in every drive after charge.
b) Charge / Drive system faults- Solid
light.