Fast Charge - Mahindra E2O Owner's Manual

Automatic electric vehicle
Hide thumbs Also See for E2O:
Table of Contents

Advertisement

3.7 FAST CHARGING*
Car is fitted with an onboard fast charging
port which uses high DC (current) supply for
charging. This requires DC fast charging
station installed exclusively for Mahindra
Reva vehicles at various locations in city.
(Contact service center and Customer care
for information).
Steps for fast charging:
1. Check for fast charging station availability
in the region.
2. Park vehicle near to fast charging station
and ensure STOP button is turned OFF.
3. Take fast charge cable from station, insert
connector with slight push into vehicle
fast charge port located next to rear
license plate.
4. Preset charging time and press start
button on fast charger.
5. Car will charge as per charge settings
selected at the time of charging.
6. Once charging is completed press
stop button on fast charger and
remove charge cable connector
from car and fit back to fast charge
unit.
Charge Duration:
Normally charging by this mode is
approximately 60 minutes from
fully discharged condition.
With a quick charge for 15 minutes
will charge 25% SOC.
2
3
TAIL GATE
1. Fast charge port
2. License lamps
3. License plate
3.7 FAST CHARGING
Air outlet

Fast Charge

display
1
Duct and
main frame
Air inlet
Ground
FAST CHARGING STATION
Air outlet
Fast Charge
connector
Fast Charger
bottom
25
Charging

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Reva e2o

Table of Contents