Tyre And Wheel Inspection; Spare Wheel; Changing A Flat Tyre - Mahindra E2O Owner's Manual

10.6 TYRE INSPECTION / 10.7 SPARE WHEEL / 10.8 CHANGING FLAT TYRE
While carrying out tyre rotation, check for
damaged tyres & wheels. Also get a check on
wheel alignment.
After every 30,000 kms vehicle usage, tyres
need rotation. Periodic rotation of tyres will
result in uniform tyre wear. It is however
essential to get wheel alignment checked.
After tyres have been rotated, get tyre pressures
adjusted to 32psi as indicated on door pillar.
10.6 TYRE INSPECTION
Hazards
Objects on the road, such as potholes, pieces of
glass, metal, rocks, wood, debris, etc. can
damage a tyre. These should be safely avoided
at all possible times. Unavoidable contact with
such objects should immediately be followed by
a tyre inspection. Always look for bulges, cracks,
cuts and abnormal tyre wear, especially on edge
of tyre tread, which might be caused by a wrong
alignment or under-inflation.
If any such damage is found, contact
nearest Authorised Service Centre
immediately.

10.7 SPARE WHEEL

All tyres in car are tubeless. Spare wheel
has been provided under hood. Get air
pressure of spare tyre every time other
tyres are checked. It should be inflated to
32 psi. For tyre repair, contact your nearest
Apollo tyre dealer. Alternatively, contact
Mahindra Reva Service center or
Customer Care.
Spare wheel
10.8 CHANGING FLAT TYRE
Follow 6 simple steps given below to change
a flat tyre:
Step 1: Park vehicle on firm, level and non-
slippery ground away from traffic. Shift gear
lever to N (Neutral) mode. Engage parking
brake, turn on hazard warning lights and turn
off key switch. Have all passengers out of
vehicle prior to changing flat tyre.
(1)
(3)
R
R
N
N
F
F
B
B
(2)
OFF
START
STOP
(4)
81
Tyres