DVB Series Direct Vent Gas Fireplace
The fireplace must be secured to the floor and/or to framing studs as shown in Figure 6. Use
two () wood screws or masonry/ concrete screws to secure fireplace to the floor. Use four (4)
screws to attach fireplace to framing. The side nailing flanges are 1/" or 5/8" to accommodate
different wall thickness.
Nailing Flange
Screws
Nailing Flange
Screws
Figure 6 -
Secure Fireplace to Floor and Framing Studs
FINIshING MAteRIAl
Note: Any remote wiring (i.e. remote control, wall switch, and optional fan) must be done prior to
final finishing to avoid costly reconstruction.
Only noncombustible materials (i.e. brick, tile, slate, steel, or other materials with a UL fire rating
of Zero) may be used to cover the black surface of the appliance. A 300°F minimum adhesive may
be used to attach facing materials to the black surface. If joints between the finished wall and the
fireplace surround are sealed, a 300°F minimum sealant material (General Electric RTV103 or
equivalent) must be used.
10
Framing
secuRe FIReplAce to FlooR or FRAMING
FP2094
secure fireplace
Drywall Support Tabs
(Do not use for framing or
header)
Framing
Nailing Flange
Screws
Nailing Flange
FP094
54D0701